30DAWE_1.5 series
30W - Single/Dual Output - Wide Input - Isolated & Regulated
DC-DC Converter
DC-DC Converter
30 Watt
Efficiency up to 90%
Operating temperature
range: -40°C ~ +80°C
The 30DAWE_1.5 series are isolated 30W DC-DC products with a wide 2:1
input voltage and feature efficiencies of up to 90%, input to output
isolation is tested with 1500VDC and the converters safely operate
ambient temperature of -40°C to +80°C, output short-circuit, over-
voltage, over-current protection. They meet CLASS A of CISPR32/EN55032
EMI standards without external components.
2:1 wide input voltage range
Output over current, over
voltage protection
Six-sided metal shield
Industry standard pinout
Meet CISPR32/EN55032 CLASS A,
without extra components
EN/UL60950 approved
Short circuit protection (SCP)
1.5kVDC isolation
No-load power consumption
as low as 0.14W
They are widely used in applications such as data transmission device,
battery power supply device, tele-comunication device, distributed power
supply system, hybrid module system, remote control system, industrial
robot fields.
UL-60950-1 (E347551)
Common specifications
Short circuit protection:
Cooling:
Output specifications
Hiccup, continous, self-recovery
Free air convection
-40°C~+80°C
Item
Test condition
Min
Typ
Max
Units
Output voltage
accuracy
5%-100% load
0%-5% load
1
1
3
5
%
%
Operation temperature range:
Storage temperature range:
Pin soldering resistance temperature:
Vibration:
Line regulation
Full load, input
voltage low to high
0.2
0.5
%
-55°C~+125°C
300°C MAX, 1.5mm from case for 10 sec
10-55Hz, 2G, 30 Min. along X, Y and Z
5-95%RH
Load regulation (1) 5%-100% load
0.5
1
%
Transient recovery 25% load step change
time
300
500
µs
Storage humidity range:
Switching frequency (PWM mode):
Case material:
Transient respon-
se deviation
25% load step change
• 3.3/5/ 5VDC output
• others
300KHz TYP
5
3
8
5
%
%
Aluminium alloy
MTBF (MIL-HDBK-217F@25°C):
Weight:
1000 K hours MIN
Temperature drift
Ripple & Noise(3)
Trim
100% full load
0.03 %/°C
27.8g
20MHz Bandwidth
50
10
100
mVp-p
%Vo
Input voltage range
(24V/48V input series)
Dimensions:
50.80 × 25.40 × 11.80 mm
① Switching frequency is measured at full load. The module reduces the switching
frequency for light load (below 50%) efficiency improvement.
Over voltage
protection
Input voltage range
(all models; except
30DAWE_12110S1.5)
110
110
160
190
%Vo
%Io
Over current
protection
Input voltage range
Input specifications
Item
Test condition
Min
Typ
40
Max
Units
mA
① Load regulation for 0%-100% load is 5%;
② The “parallel cable” method is used for Ripple and Noise test.
Reflected ripple
current
Surge voltage
(1 sec. max)
• 24VDC input
• 48VDC input
-0.7
-0.7
50
VDC
VDC
Isolation specifications
100
Item
Test condition
Min
Typ
Max Units
VDC
Start-up voltage
• 24VDC input
• 48VDC input
18
36
VDC
VDC
Isolation voltage
Tested for 1 minute and 1500
leakage current less
than 1 mA
Start-up time
Nominal input & cons-
tant resistance load
10
ms
Isolation resistance
Test at 500VDC
100KHz/0.1V
1000
MΩ
pF
Input filter
Hot plug
Ctrl(1)
Pi
Isolation
capacitance
2000
Unavailable
• Module on
Ctrl pin open or pulled high
(3.5-12VDC)
Ctrl pin pulled low to GND
(0-1.2VDC)
Note:
• Module off
1. The maximum capacitive load offered were tested at input voltage range and
full load;
• Input current when off
5
8
mA
2. Unless otherwise specified, parameters in this datasheet were measured under
the conditions of Ta = 25°C, humidity <75%RH with nominal input voltage and
rated output load;
① The Ctrl pin voltage is referenced to input GND.
3. All index testing methods in this datasheet are based on company corporate
standards;
4. We can provide product customization service, please contact our technicians
directly for specific information;
5. Products are related to laws and regulations: see „Features“ and „EMC“;
6. Our products shall be classified according to ISO14001 and related environmen-
tal laws and regulations, and shall be handled by qualified units.
Example:
30DAWE_2415S1.5
30 = 30Watt; D = DIP; A = series; W = wide input (2:1) 18-36Vin;
E = cost effective; 15Vout; S = single output; 1.5 = 1500VDC isolation
Page 1 of 4
30DAWE_1.5 – Rev. 2020-1.1
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com