Datasheet > 308132-1

308132-1

更新时间： 2024-02-05 16:41:07

品牌	Logo	应用领域
MACOM		/
页数	文件大小	规格书
8页	357K
描述
Remove assembly pins from mounting lugs as shown in Figure 1

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

308132-1 数据手册

This instruction sheet provides instructions on product

application and Maintenance and Inspection for

Insulation Piercing COPALUM Terminal and Splice

Crimping Heads (68081 and 68082) used in

Pneumatic Tool 69015. These crimping heads are

used to crimp COPALUM Terminals and Splices on

No. 8 thru 6 film insulated solid aluminum or copper

wire or stranded copper wire.

Basic instructions on the use of these heads, wire

preparation, etc. are provided in Section 2,

INSTRUCTIONS. Section 3 features terminal or

splice Crimp Inspection Procedure. Section 4

contains a Maintenance and Inspection Procedure

which will enable you to establish a tool certification

program.

Figure 1

2. Remove assembly pins from mounting lugs as

shown in Figure 1.

Crimping heads are coated with preservative to

prevent runt and corrosion. Wipe this preservative

from heads, particularly from the crimping areas. For

further instructions relative to the 69015 tool, refer to

the instructions packaged with the tool.

3. Pull toggle arm forward and insert toggle lever

shank of crimping head all the way into hole in

toggle arm until toggle lever snaps in place. See

Figure 1.

4. Align holes in crimping head links with holes in

mounting lugs.

5. Insert assembly pins.

6. Connect air supply to tool 586 to 689 kPa

[85 to 11 psi].

Reasons for reissue are provided in Section 5,

REVISION SUMMARY.

7. Tool is now ready for operation.

1. Remove assembly pins.

2. Lower head away from mounting lugs, twist

head 90° and remove from toggle arm.

3. Reinstall assembly pins.

1. Select the correct crimping head for the wire

size being used. Wire size and the insulation

piercing crimp symbol ( ) appear on one jaw as

shown in Figure 1.

Solid aluminum or copper (or a combination of both)

and stranded copper conductors may be crimped in

the same wire barrel under the following conditions:

12 3 4 5 6 7 8

中文翻译

下载PDF

与308132-1相关器件

型号	品牌	获取价格	描述	数据表
308134-1	MACOM	获取价格	Remove assembly pins from mounting lugs as shown in Figure 1
308-196	ETC	获取价格	Optoelectronic
3081RD005	ALPHAWIRE	获取价格	Wire And Cable, 1 Conductor(s), 10AWG, 600V, Flexible Cord And Fixture Wire
3082	BOURNS	获取价格	1/2 Rectangular TrimpotÂ® Trimming Potentiom
308209-1	TE	获取价格	The care, amount of use, and handling of the dies.
308209-2	TE	获取价格	The care, amount of use, and handling of the dies.
308209-3	TE	获取价格	The care, amount of use, and handling of the dies.
308210-1	TE	获取价格	The care, amount of use, and handling of the dies.
308210-2	TE	获取价格	The care, amount of use, and handling of the dies.
308210-7	TE	获取价格	The care, amount of use, and handling of the dies.