PL-700SM-N SERIES
Plastic Shell Auto-Coupling Connectors
27 Pole Capacity Circular Shell
CONNECTOR TERMINATION OPTIONS
Contact Termination
All Connectors
Panel 1
“Press & Seal” Contact System
“Press & Seal” Features &
Benefits
Fixed Solder Cup
Tiered solder cups
provide easy access
to center positions.
Canted cups facilitate
quick and easy wire
positioning. Standard
on 10 to 27-pole
• Contacts provide IP-67 water-
tight seal when inserted into insu-
lator
• Easy crimp & poke installation
• Excellent contact retention
• Contacts may be crimped or
soldered
Available on 1 to 7-pole configurations
Accepts wire gauges up to 12 AWG (1 pole),
16 AWG (2 poles), 22 AWG (7 poles)
configurations
PCB Termination
Panel-Mount Receptacles
Panel 2
PCB Mounting Template - 27 Pole
PCB Mounting Template - 14 Pole
Features & Benefits
f .162 B.C.
• Available in most pole counts
from 1 to 27 poles
f .102 B.C.
9 holes
4 holes
• PCB stand-offs ensure proper
positioning
• Convenient packaging -- high-
temperature contect cures may
be soldered to PCB and
snapped into panel-mounted
receptacle housing later
f .268 B.C.
Hole dia.
15 holes
f .244 B.C.
.034 +/- .01
10 holes
f .062 B.C.
f .580 B.C.
3 holes
33 holes
Request Sales Drawing SD-106487
Request Sales Drawing SD-106486
Panel-Mount Cut-Out Templates
In-Line Plug & Receptacle Backshell Table C
(wire exit i.d.)
A
f .625
f .70
Mounting Flange
Footprint (f.75 for
RPM spanner nut)
Standard color is black.
Gray is optional.
1.10
In-Line Backshell -
The PL-700 plug housing is designed to accept Alden’s one piece, Press &
SealPVC Backshell. This unique backshell simply snaps into place providing
an IP-67 rated seal to the plug housing and cable exit without hardware result-
ing in a clean overmolded look. For optimum sealing we suggest selecting a
wire exit i.d. that is at least .005” smaller than your nominal cable diameter.
.560
Applies to both front & rear panel-mount receptacles
Part #
Black
Part #
Gray
Dimension A
Accessory Description
0.053
0.064
0.075
0.086
0.096
0.104
0.120
0.129
0.142
0.153
0.162
0.170
0.186
0.204
0.215
0.225
0.235
0.249
0.264
0.300
300350
300352
300354
300356
300358
300360
300362
300364
300366
300368
300370
300372
300374
300376
300378
300380
300382
300384
300386
300388
300351
300353
300355
300357
300359
300361
300363
300365
300367
300369
300371
300373
300375
300377
300379
300381
300383
300385
300387
300389
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
Plug Backshell
All measurements in inches
Accessories
Plug Soaking Cap
Alden P/N 107349-01
Standard color is black. Gray optional.
Assembly Instructions
Panel-Mount Receptacle (1 to 7 pole) = AI-PL30A
Panel-Mount Receptacle (10 to 27 pole) = AI-PL30B
In-Line Plug (1 to 7 pole) = AI-PL31A
In-Line Plug (10 to 27 pole) = AI-PL31B
Phone: 508-427-7000
Fax: 508-583-0164
www.amphenolalden.com
For additional information about this, or any other Alden product, please
contact an Amphenol Alden specialist today.
3
© 2012 Amphenol Alden “Pulse-Lok” is a trademark of Amphenol Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.