Datasheet > 2CPSA2D2B

2CPSA2D2B

更新时间： 2023-01-02 18:10:14

品牌	Logo	应用领域
霍尼韦尔 - HONEYWELL		/
页数	文件大小	规格书
10页	711K
描述
Snap Acting/Limit Switch, 4PST, Momentary, 2.8A, 24VDC, Connector Terminal, Panel Mount

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

2CPSA2D2B 数据手册

CPS Series

Cable Pull Safety Switch

FEATURES

• Direct opening action

of NC

(normally closed) contacts

• 2CPS: 2NO/2NC, 1NO/3NC or 4NC

contact configurations

1CPS: 1NO/1NC, 2NO/2NC, 1NO/3NC or

4NC contact configurations

• Typical cable span of 76 m (250 ft) in an

environment with a temperature change

of ±17 °C (±30 °F). Longer spans are

possible depending upon temperature

change and installation

(Applied for)

(ref. note on page 6 for more details or

Application note - Effect of Temperature

on Cable Pull Switch Operation)

• Choice of three actuator configurations

(2CPS)

• Removable contact block version

available (2CPS)

• Large wiring cavity with straight-

through wiring

CPS Series Cable Pull Safety Switches provide a readily accessible emergency stop

signal. This is a cost-effective means compared to using multiple emergency stop

push-buttons. (Cable Pull Safety Switches are not, however, to be used as a means

of personnel safeguarding. They may be used to prevent further injury or damage to

equipment when used for emergency stop signaling.)

The CPS Series Cable Pull Safety switch is designed to provide emergency stop

protection for exposed conveyor and assembly lines. The internal mechanism

latches on both slackened cable (push) and pulled cable. This capability also en-

hances productivity by eliminating nuisance stops due to variations in temperature,

stretch of cable over time, and other application variables.

• 24 Vdc or 120 Vac bright, multicluster

LED status indicator light available on

2CPS. Single high intensity LED on 1CPS

• Gold-plated contacts are standard on

2CPS, available on 1CPS

The 1CPS is intended for use in applications where the cable span is 76 m (250 ft)

or shorter. It is an economical solution for shorter runs or zone protection typical to

automated systems. The 2CPS series is intended for use in very long cable runs of

152 m (500 ft) or shorter, such as long conveyor lines found in warehouses.

• Die-cast zinc housing

• Optional hardware packs available

A line in the midpoint of the cable tension window indicates proper cable tension,

providing easy set-up. The direct opening switch contacts are held closed when the

actuating cable is under proper tension and the reset knob is set to RUN. When the

actuating cable is pulled, slackened or broken, a cam positively opens the NC (Nor-

mally Closed) switch contacts. The snap action, trip operation causes the switch

contacts to change state and mechanically latch almost simultaneously when the

cable is pulled, slackened or broken. The NC switch contacts remain open until the

CPS is reset by properly tensioning the cable and manually rotating the reset knob.

TYPICAL APPLICATIONS

• Long conveyor systems found in

warehouses and distribution centers

• Conveyor systems having a high amount

of vibration

• Conveyor systems that experience wide

temperature swings

• Long conveyor systems where easy

through wiring, or highly visible trip

status is required

• Hose down conditions

• Packaging equipment

• Assembly lines

When the direct opening switch contacts open, the auxiliary contacts also actuate

(open contacts close and closed contacts open). The auxiliary contacts are electri-

cally isolated from the direct opening switch contacts. These NO (Normally Open)

contacts may be used for monitoring or signaling.

The CPS complies with: Low Voltage Directive 73/23/EEC, as amended by directive

93/68/EEC; Machinery Directive 98/37/EEC only as the directives relate to the

components being used in a safety function; IEC/EN 60947-1; IEC/EN 60947-5-1;

IEC/EN 60947-5-5.

WARNING

MISUSE OF DOCUMENTATION

•

The information presented in this product sheet (or catalogue) is for reference only. DO NOT USE this document as system

installation information.

•

Complete installation, operation and maintenance information is provided in the instructions supplied with each product.

Failure to comply with these instructions could result in death or serious injury.

• Safety Products for Machine Safeguarding •

12 3 4 5 6 7...10

中文翻译

下载PDF

与2CPSA2D2B相关器件

型号	品牌	获取价格	描述	数据表
2CPSA2D3	HONEYWELL	获取价格	Snap Acting/Limit Switch
2CPSA2D3B	HONEYWELL	获取价格	Snap Acting/Limit Switch, 4PST, Momentary, 2.8A, 24VDC, Connector Terminal, Panel Mount
2CPSB1A1B	HONEYWELL	获取价格	Snap Acting/Limit Switch, 4PST, Momentary, 2.8A, 24VDC, Panel Mount
2CPSB1A2A	HONEYWELL	获取价格	Snap Acting/Limit Switch, 4PST, Momentary, 2.8A, 24VDC, Panel Mount
2CPSB1A4A	HONEYWELL	获取价格	Snap Acting/Limit Switch, 4PST, Momentary, 2.8A, 24VDC, Screw Terminal, Panel Mount
2CPSB1A4B	HONEYWELL	获取价格	Snap Acting/Limit Switch, 4PST, Momentary, 2.8A, 24VDC, Screw Terminal, Panel Mount
2CPSB1A5A	HONEYWELL	获取价格	Snap Acting/Limit Switch, 4PST, Momentary, 2.8A, 24VDC, Screw Terminal, Panel Mount
2CPSB1A5B	HONEYWELL	获取价格	Snap Acting/Limit Switch, 4PST, Momentary, 2.8A, 24VDC, Screw Terminal, Panel Mount
2CPSB1A6A	HONEYWELL	获取价格	Snap Acting/Limit Switch, 4PST, Momentary, 2.8A, 24VDC, Screw Terminal, Panel Mount
2CPSB1A6B	HONEYWELL	获取价格	Snap Acting/Limit Switch, 4PST, Momentary, 2.8A, 24VDC, Screw Terminal, Panel Mount

与2CPSA2D2B相关文章

LM317T数据手册解读：产品特性、应用、封装与引脚详解
2024-06-14

13
一文带你了解?DB3二极管好坏判断、参数信息、替代推荐
2024-06-14

15
LM358DR数据手册：引脚说明、电气参数及替换型号推荐
2024-06-14

10
OP07CP数据手册解读：引脚信息、电子参数
2024-06-14

16

产品中心

服务支持

精选活动

关于我们

帮助中心

2CPSA2D2B

2CPSA2D2B 数据手册

与2CPSA2D2B相关器件

与2CPSA2D2B相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

2CPSA2D2B

2CPSA2D2B 数据手册

与2CPSA2D2B相关器件

与2CPSA2D2B相关文章

您还可以找

您在本页遇到什么问题？