408-8676
3. OPERATION OF THE WRENCHES
NOTE
If a wrench has not been used recently, move the wrench head back and forth several times, listening for audible "clicks."
Clicking the wrench head back and forth spreads lubricant throughout the internal mechanism to improve wrench
performance.
WRENCH SIZE
TE CONNECTIVITY
PART NUMBER
mm
6.4
[inches]
[1/4]
1406504-1
1406504-2
1406504-3
1406504-4
1406504-5
1406504-6
1406504-7
1406504-8
1406504-9
1-1406504-0
1-1406504-1
1-1406504-2
1-1406504-3
1-1406504-4
1-1406504-5
8.0
[5/16]
[3/8]
9.6
12.8
19.6
11.2
7.1
[1/2]
[3/4]
[7/16]
[9/32]
[13/32]
[11/16]
[9/16]
[11/32]
[5/8]
10.4
17.6
14.6
8.8
16.0
20.8
4.0
[13/16]
[5/32]
[15/64]
6.1
Figure 2
Using the appropriate sized head (Figure 1), turn the wrench clockwise (or counterclockwise) until there is an
audible "click." This "click" indicates that the proper torque has been achieved.
CAUTION
Do NOT over-tighten the connector with the torque wrench. Over-tightening the wrench could result in inaccurate torque
settings.
CAUTION
Do not use or re-terminate damaged connectors.
4. REPLACEMENT
Remove the wrench head by pulling it off the production torque wrench. Then replace the head with the
appropriate head listed in Figure 2.
Order replacement parts through your TE Representative, or call 1-800-526-5142, or send a facsimile of your
purchase order to 717-986-7605, or write to:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
5. REVISION SUMMARY
Updated document to corporate requirements
Added tolerances to table in Figure 1
2 of 2
Rev G