https://www.phoenixcontact.com/in/products/1929135
PCB terminal block - MKDS 5/ 5-6,35 NZ:17481 - 1929135
Technical data
Dimensions for the product
Solder pin [P]
Pin dimensions
Dimension a
5.1 mm
0.9 x 0.9 mm
25.4 mm
Dimensions for PCB design
Hole diameter
1.3 mm
Packaging information
Type of packaging
packed in cardboard
Pieces per package
50
Denomination packing units
Pcs.
General product information
Type of note
Note on application
For safe conductor connection, always adhere to a defined tightening
torque. Particularly in the case of PCB terminal blocks with two or
three positions, the individual solder pin for each contact point cannot
compensate for this. That is why the terminal blocks must be supported
during conductor connection (held with one hand, support on the
housing).
Note
Ambient conditions
Ambient temperature (storage/transport)
Ambient temperature (assembly)
Ambient temperature (operation)
-40 °C ... 70 °C
-5 °C ... 100 °C
-40 °C
Termination and connection method
Pull-out test
Pull-out test
IEC 60998-2-1:1990-04
Test passed
Conductor cross section / conductor type / tensile force
0.2 mm² / solid / > 10 N
0.2 mm² / flexible / > 10 N
6 mm² / solid / > 80 N
4 mm² / flexible / > 60 N
Mechanical tests according to standard
Test specification
IEC 60998-2-1 (in parts)
Electrical tests
Rated current
32 A
630 V
6 kV
Rated insulation voltage (III/2)
Rated surge voltage (III/2)
Air clearances and creepage distances
Insulating material group
Voltage
I
500 V
Rated insulation voltage (III/3)
500 V
01/19/2019 Page 3 / 6