T
Technical Summary
Technical Information
Primary Dielectric Types
C0G/NP0:
Novacap provides application notes throughout this catalog
as a guide to chip selection and attachment methods. Refer
to the Novacap Technical Brochure found at www.novacap.
com for more details. This technical information includes
the nature of capacitance, dielectric properties, electrical
properties, classes of dielectrics, ferroelectric behavior, test
standards, and high reliability test plans. Please do not
hesitate to contact the sales office for any product or technical
assistance.
Ultra stable Class I dielectric, with negligible dependence of
capacitance on temperature, voltage, frequency, and time.
Used in circuitry requiring very stable performance.
X7R:
Stable Class II dielectric, with predictable change in properties
across a temperature range of -55°C to +125°C. Used as
blocking, decoupling, bypassing, and frequency discriminating
elements. This dielectric is ferroelectric and provides higher
capacitance than Class I materials.
Capacitor Size
Size availability is based primarily on capacitance values and
voltage rating. Smaller units are generally less expensive.
Because mass affects the thermal shock susceptibility of chip
capacitors, size selection should consider the soldering method
used to attach the chip to the board. Sizes 1812 and smaller
can be wave, vapor phase, or reflow soldered. Larger units
require reflow soldering.
BX:
The military specification for ceramic chip capacitors (MIL-
PRF-55681) defines a mid-K stable dielectric designated as BX.
The BX specification has voltage temperature limits in addition
to temperature limits of capacitance. The BX dielectric is
limited to 15% maximum change in capacitance between
25°C and -55°C or +125°C and also has a voltage restriction
of +15% / -25% maximum change in capacitance between
25°C and -55°C or +125°C at rated voltage.
Chip Selection
Multilayer capacitors (MLC) are categorized by dielectric
performance with temperature. The Temperature Coefficient
of Capacitance describes the variance of capacitance value
with temperature. The choice of components is therefore
largely determined by the temperature stability required of the
device and the size necessary for the desired capacitance value
and voltage rating.
Z5U/Y5V:
General purpose Class III dielectrics with higher dielectric
constant and greater variation of properties over temperature
and voltage. Very high capacitance per volume is attainable
for general purpose applications where stability over a wide
temperature range is not critical.
Packaging
Units are available reeled, in waffle pack, or bulk packaged.
Bar coded labels are standard for reeled and bulk packaging.
Dielectric
Termination
Combinations
Termination Material
We recommend the following
termination types:
Solder Attachment:
N Nickel Barrier, 100% matte
tin plated - RoHS
C
FlexiCap™ with Nickel
Barrier, 100% tin plated - RoHS
Nickel Barrier, tin-lead plated
RoHS RoHS RoHS
RoHS RoHS
RoHS
B
RoHS
Y
Dielectric
C0G/NP0
R3L
Code
P
•
•
•
PR
•
K
•
•
•
N
•
•
•
•
•
•
Y
•
•
•
•
•
•
NG
•
C
•
•
•
D
•
E
S
D FlexiCap™ Nickel Barrier,
tin-lead plated
N/RN
K
•
•
•
•
X7R
B/RB
BB
BW
X
•
•
•
•
•
B
Copper Barrier 100% matte
tin plated - RoHS
Copper Barrier, tin-lead
plated
X7R BME
X5R BME
BX
•
•
E
•
•
•
•
•
•
•
•
•
•
Y5V
Y
K
Solderable Palladium Silver -
Z5U
Z
RoHS (suitable for conductive epoxy attach)
C0G/NP0 (Mag free
)
M
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
S
Solderable Silver - RoHS
Conductive Epoxy attachment:
Palladium Silver
X7R (Mag free
)
X8R
S
•
•
•
•
•
•
•
•
•
•
•
•
•
P
C0G/NP0 (160ºC)
C0G/NP0 (200ºC)
Class II (160ºC)
Class II (200ºC)
Pulse Power
F
D
PR Palladium Silver - RoHS
G
•
•
•
•
•
•
NG Nickel Barrier Gold Flash -
RoHS (suitable for soldering attach)
E
P
•
•
•
•
R2D
R
www.novacap.com | Phone: +1.661.295.5920 |
3
5秒后页面跳转
TLP250光耦合器：资料手册参数分析
DA14580 低功耗蓝牙系统级芯片(SoC)：资料手册参数分析
INA226 高精度电流和功率监控器：资料手册参数分析
SI2302 N沟道MOSFET：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
