Model 150D
Vishay Sprague
Solid Tantalum Capacitors
®
Solid-Electrolyte TANTALEX Capacitors Hermetiically-Sealed, Axial-Lead
High performance, hermetically-sealed Type 150D
TANTALEX® capacitors have set the standard for solid-
electrolyte tantalum capacitors for more than three
decades.
These hermetically-sealed precursors of Military Style
CSR13 feature high capacitance, low DCL, low dissipation
factor and exceptional operating stability. Their perfor-
mance and reliability have been proven in commercial,
industrial and military applications.
Standard Model 150D capacitors are furnished in four case
codes and are supplied with plastic-film insulation. Termi-
nals are solid, tinned nickel wire leads.
The Military equivalent to the 150D is the CSR13 which is
qualified to MIL-C-39003/01.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55°C to + 85°C. (To + 125°C
with voltage derating.)
At +125°C: Leakage shall not exceed 15 times the values
listed in the Standard Ratings Tables.
Capacitance Tolerance: At 120 Hz, + 25°C. 20%,
10% standard. 5% available as special.
Life Test: Capacitors shall withstand rated DC
voltage applied at + 85°C for 2000 hours or derated DC
voltage applied at + 125°C for 1000 hours.
Following the life test:
Dissipation Factor: At 120 Hz, + 25°C. Dissipation factor,
as determined from the expression 2πfRC, shall not exceed
the values listed in the Standard Ratings Tables.
DC Leakage Current (DCL Max.):
1. DCL shall not exceed 125% of the initial
requirement.
At + 25°C: Leakage current shall not exceed the values
listed in he Standard Ratings Tables.
2. Dissipation Factor shall meet the initial requirement.
3. Change in capacitance shall not exceed 2%.
At + 85°C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables.
DIMENSIONS in inches [millimeters]
1.500 0.250
[38.10 6.35]
1.500 0.250
D
[38.10 6.35]
Dia.
L
0.047 [1.19] Max.
0.125 [3.18] Max.
Solid Tinned
Nickel Leads
J
Max.
WITH INSULATING SLEEVE*
CASE
LEAD SIZE
AWG
NO.
NOM.
DIA.
CODE
D
L
J (Max.)
0.135 0.016
[3.43 0.41]
0.286 0.031
[7.26 0.79]
0.422
[10.720]
24
24
22
22
0.020
[0.51]
A
B
R
S
0.185 0.016
[4.70 0.41]
0.474 0.031
[12.04 0.79]
0.610
[15.490]
0.020
[0.51]
0.289 0.016
[7.34 0.41]
0.686 0.031
[17.42 0.79]
0.822
[20.880]
0.025
[0.64]
0.351 0.016
[8.92 0.41]
0.786 0.031
[19.96 0.79]
0.922
[23.420]
0.025
[0.64]
*When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body.
Document Number: 40015
Revision 12-Jan-01
www.vishay.com
13