Reference Only
Spec No. J(E)TE243A-0002B-01
2/9
DFE252012C Type 電気的個別性能 Electrical specifications
インダクタンス
Inductance
直流抵抗
定格電流
定格電流
(温度上昇に基づく
場合)
(インダクタンス変
化に基づく場合)
部 品 番 号
品 番
公称値 許容差
Nominal Tolerance
Value
Rated Current
Based on
DC
Rated Current
Based on
Customer's Part No.
Part No.
Resistance
Inductance Change
Temperature rise
(A) (Max.)
(%) (mΩ) (Max.) (A) (Max.)
(μH)
1239AS-H-R47M=P2 0.47
1239AS-H-1R0M=P2 1.0
1239AS-H-1R5M=P2 1.5
1239AS-H-2R2M=P2 2.2
1239AS-H-3R3M=P2 3.3
1239AS-H-4R7M=P2 4.7
1239AS-H-6R8M=P2 6.8
±20
±20
±20
±20
±20
±20
±20
±20
39
59
3.8
3.0
2.6
2.2
1.8
1.5
1.3
1.0
3.7
3.0
2.4
2.0
1.5
1.3
1.0
0.85
72
108
144
240
375
460
1239AS-H-100M=P2
10
(1)インダクタンス
Inductance
: LCRメータ 4284A(KEYSIGHT)または同等品により測定。(測定周波数 1MHz 、レベル 0.5V)
: Measured with a LCR meter 4284A(KEYSIGHT) or equivalent.(Test Freq. 1MHz、Level 0.5V)
(2)直流抵抗
DC Resistance
: 抵抗計 3541(HIOKI)または同等品により測定。
: Measured with a Resistance Hitester 3541(HIOKI) or equivalent.
(3)定格電流
: 定格電流(インダクタンス変化に基づく場合)又は定格電流(温度上昇に基づく場合)の
何れか小さい方の直流電流値とします。
Rated Current
: Value defined when DC current flows and Rated Current (Based on Inductance change)
or when DC current flows and Rated Current (Based on Temperature rise) whichever is smaller.
・定格電流
: 定格電流(インダクタンス変化に基づく場合)とはインダクタンスが初期値より30%低下した時の
(インダクタンス変化に基づく場合)
電流値。
・Rated Current
(Based on Inductance change)
: The saturation allowable DC current value is specified when the decrease of the
initial Inductance value at 30%.
・定格電流
(温度上昇に基づく場合)
: 定格電流(温度上昇に基づく場合)とは、試験基板(6層基板)に実装したインダクタに直流を
ꢀ 流した時の製品温度上昇が 40℃ に達する電流値。
・Rated Current
(Based on Temperature rise)
: Rated Current (Based on Temperature rise) is specified when temperature of the
inductor on our PCB(6 layers) for test purpose is raised 40℃ by DC current.
(4)絶対最大電圧
: 絶対最大電圧は20V DC です。
Withstand voltage
: Withstand voltageꢀ20V DC.
*特に指定がない限り、測定は標準状態で行う。
ꢀUnless otherwise specified, measurements are the standard atmospheric condition.
MURATA MFG.CO., LTD.