MODEL: 10BX
High-density Signal Conditioners 10-RACK
[2] OPTIONS (multiple selections)
Mounting Bracket
blank: Rack mounting, standard
/W: Surface mounting
STANDARD RACK
Functions & Features
Other Options
• Standard 19" rack for 10-RACK signal conditioners
• 4 – 16 modules mountable
blank: none
/Q: Option other than the above (specify the specification)
• Line power access at the terminal card, supplied via the
rear rack bus
• Direct interface to various DCS with the rack side
connector
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Power supply and signal conditioner side of the main PWB are not coated.
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
RELATED PRODUCTS
• Blank filler plate (model: P-101)
• Connector terminal block (model: CNT)
• Special cable with 40-pin connector (model: FCN)
MODEL: 10BX–[1][2]
GENERAL SPECIFICATIONS
Construction: Metal plates assembly
Coating: Zn-Cr (black), alumetized steel
Connection
ORDERING INFORMATION
• Code number: 10BX-[1][2]
Specify a code from below for each [1] and [2].
(e.g. 10BX-1/W/Q)
Power input: M4 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated brass
Isolation: I/O connector to power to FG
• Specify the specification for option code /Q
(e.g. /C01)
[1] CAPACITY & TERMINAL CARD FUNCTION
1: 16 ch.; 24 V DC powered
INSTALLATION
Power consumption
2-K: 15 ch.; 85 – 132 V AC powered
•AC: 85 – 132 V or 170 – 264 V, 47 – 63 Hz, 130 VA
minimum
2-L: 15 ch.; 170 – 264 V AC powered
3: 15 ch.; 24 V DC & 85 – 132 V AC powered
(two independent power sources)
•DC: Operating voltage range 24 V DC ±10 %, 2.5 A
minimum (ripple 10 % p-p max.)
Operating temperature: -5 to +55°C (23 to 131°F) 0 to 50°C
(32 to 122°F) for AC power
4: 16 ch.; 24 V DC (Fujitsu FCN type I/O connector)
7: 16 ch.; 24 V DC (Yokogawa VMx / PM1 card use)
8: 16 ch.; 24 V DC (Omron 3G8B2-NA000 / NA001 use)
10: 16 ch.; 24 V DC (Nippon Shokubai DCS use)
11: 16 ch.; 24 V DC (Azbil J-HAM50 / J-HMM00 module use)
12: 16 ch.; 24 V DC (Azbil J-AOM10 module use)
13: 8 ch.; 24 V DC (Azbil J-PIM00 module use)
A: 4 ch.; 24 V DC powered
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting
15, 16-position rack, 10BX-13: JIS or EIA standard rack or
surface
4, 8, 9-position rack: Angle bracket or surface
Weight
B: 4 ch.; 85 – 132 V AC powered
10BX-1, 4, 7, 8, 10, 11, 12, 13, D: 1.9 kg (4.2 lb)
10BX-2, 3: 2.3 kg (5.1 lb)
C: 9 ch.; 24 V DC powered
D-K: 8 ch.; 85 – 132 V AC powered
10BX-A: 1.1 kg (2.4 lb)
D-L: 8 ch.; 170 – 264 V AC powered
10BX-B: 1.3 kg (2.9 lb)
M-System guarantees the connecting section.
10BX-C: 1.5 kg (3.3 lb)
http://www.m-system.co.jp/
10BX SPECIFICATIONS
ES-0891 Rev.12 Page 1/5
5秒后页面跳转
TLP250光耦合器：资料手册参数分析
DA14580 低功耗蓝牙系统级芯片(SoC)：资料手册参数分析
INA226 高精度电流和功率监控器：资料手册参数分析
SI2302 N沟道MOSFET：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
