Circuit Protection
Product Specification
2
8
1.5KE
Transient Voltage Suppressors
Transient Voltage Suppressors (TVS) Data Sheet
Features
■ Glass passivated junction
■ Low zener impedance
■ Excellent clamping capability
■ 1500W peak pulse power capability at 10/1000μs waveform,
repetition rate (duty cycle): 0.01%
■ Fast response time
■ Typical IR less than 1μA above 12V.
■ High Temperature soldering guaranteed: 265℃/10 seconds/.375″,
(9.5mm) lead length, 5lbs (2.3kg) tension
■ Plastic package has underwriters laboratory flammability 94V-0
■ Meets MSL level 1, per J-STD-020.
■ Safety certification: UL: E244458
Mechanical Data
■ Case: JEDEC DO-201 Moulded plastic
■ Terminal: Axial leads, solderable per MIL-STD-750, Method 2026
■ Polarity: Color band denotes cathode except bi-directional models
■ Mounting Position: Any
■ Weight: 0.97g
Applications
■ I/O interface
■ AC/DC power supply
■ Low frequency signal transmission line (RS232, RS485, etc.)
Maximum Ratings and Characteristics
Ratings at 25℃ ambient temperature unless otherwise specified.
Rating
Symbol
PPPM
Value
Units
Peak pulse power dissipation at 10/1000μs waveform
Minimum 1500
Watts
(Note1, Fig.1)
Peak pulse current of at 10/1000μs waveform (Note 1, Fig.3)
Steady state power dissipation at TL=75℃ (Fig.5)
IPPM
See Table
6.5
Amps
Watts
PM(AV)
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load, (JEDEC Method) (Note2, Fig.6)
IFSM
200
Amps
Operating junction and Storage Temperature Range.
Typical thermal resistance junction to lead
TJ,TSTG
RθJL
-55 to +175
℃
15
75
℃/W
℃/W
Typical thermal resistance junction to ambient
RθJA
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2.
2. 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum.
www.yageo.com
Apr. 29, 2019 V.0