TNC
Standard TNC Specifications
Electrical
Impedance
Frequency range
VSWR
50 Ω nominal
DC - 11 GHz
1.3 max. @ DC - 11 GHz (straight)
1.35 max. @ DC - 11 GHz (right-angle)
60 dB minimum @ 3 GHz
≥ 500 V peak (depending on cable)
center contact: ≤ 1.5 mΩ
outer contact: ≤ 0.2 mΩ
RF-leakage
Voltage rating (at sea level)
Contact resistance
braid to body: ≤ 0.1 mΩ
Insulation resistance
Insertion loss maximum
Dielectric withstanding voltage
Mechanical
5,000 MΩ minimum
0.18 dB @ 9 GHz
1,500 Vrms (at sea level)
Mating
7/16 threaded coupling (MIL-STD-348)
4.1 / 6.1 in-lbs (46 / 69 N-cm), recommended
101 lbs (450N) min.
Hex crimp or screw-threaded clamps
500 cycles minimum
Coupling torque, min./max.
Coupling nut retention force
Braid/Jacket cable affixment
Durability (matings)
Environmental
Temperature range
Weatherproof
Hermetic seals
Thermal shock
Moisture resistance
Corrosion
-65°C to +165°C
crimp: w/ heat shrink tubing, clamp: w/ gasket
Helium leak test, 2 x 10^8 cc/sec.
MIL-STD-202, method 107, cond. B
MIL-STD-202, method 106
MIL-STD-202, method 101, cond. B
MIL-STD-202, method 204, cond. B
MIL-STD-202, method 213, cond. G
MIL-STD-202, method 105, cond. C
Vibration
Mechanical shock
Altitude
Material
Male contact
Brass, gold plated
Female contact
Crimp ferrule
Beryllium copper or phosphor bronze, silver or gold plated
Copper or brass, nickel plated
Other metal parts
Insulator
Gasket
Brass, nickel plated (except M39012 silver plated)
PTFE, copolymer of styrene, glass TFE (hermetically sealed)
Silicone or synthetic rubber
Plug
Jack
Å
Å
Å
Note: These characteristics are typical but may not apply to all connectors.
Amphenol® RF: 800-627-7100
123
TNC