Hand Tool for Disk Drive Power Connection System Crimp Terminals
HAND CRIMP TOOL
SPECIFICATION SHEET
Order No. 63811-7000
TYPE 2C
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
This tool is IPC/WHMA-A-620 Class 2 and RoHS compliant
SCOPE
Products: Disk Drive Power Connection System Crimp Terminal 14-22 AWG.
Terminal
Series No.
Terminal Order No.
Loose Piece
Wire Size
AWG mm²
Insulation Diameter
mm In.
Strip Length
mm In.
Reel
02-08-1202 02-08-1237 02-08-1201 02-08-1334 14-16 2.00-1.30 2.75-3.56 .109-.140 4.75-5.54 .187-.218
02-08-1235 02-08-1335 02-08-1234 02-08-1236
8980
18-20 0.80-0.50 2.00-2.90 .079-.114 4.75-5.54 .187-.218
02-08-1204 02-08-1337 02-08-1203 02-08-1336 18-22 0.80-0.35 1.52-2.30 .060-.090 4.75-5.54 .187-.218
Follow the Cut-Off Tab specifications on Applicator specification sheets.
These Terminals cannot be removed from the reel by manual cutting.
An applicator must be used or the terminals will not function properly.
DEFINITION OF TERMS
BEND UP
CONDUCTOR
CRIMP
BRUSH
BELL MOUTH
INSULATION
CRIMP
ROLLING
TWISTING
STRIP
LENGTH
BEND
DOWN
CRIMP HEIGHT
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
Doc No: ATS-638117000
Revision: B
Release Date: 01-19-07
Revision Date: 03-29-08
UNCONTROLLED COPY
Page 1 of 6