Extractor Tool for 1.57mm (.062") Diameter, Standard .062" Pin and Socket Crimp Terminals
OPERATION:
RETRACTABLE
SPRING LOADED
TUBE
HANDLE
TERMINAL
PUSH-OUT
PIN (SOLID)
RETRACTABLE
SPRING
TERMINAL
TERMINAL
Figure 2
LOADED TUBE
LOCKING
TABS
Figure 1
CONNECTOR
HOUSING
CONNECTOR
HOUSING
1. The Extractor Tool must be In Line with the terminal as
shown. Push terminal forward in arrow direction before
using the Extractor Tool. See Figure 1.
RETRACTABLE
TUBE
TERMINAL
PUSH-OUT
PIN (SOLID)
2. The Retractable Spring Loaded Tube must depress the
Locking Tabs on the terminal before it contacts the
Terminal Push out pin. Rotate Extractor Tool while
following above instructions. See Figure 2.
3. The terminal push-out pin (solid) pushes the terminal back
through the connector hole as the retractable tube recedes
into the handle. Always re-spread the locking tabs when
reinserting the same terminal.
Figure 3
CONNECTOR
HOUSING
4. Molex does not offer repair parts for Extractor Tools due to
the inexpensive nature of these tools.
TERMINAL
Americas Headquarters
Far East North Headquarters Far East South Headquarters European Headquarters Corporate Headquarters
Lisle, Illinois 60532 U.S.A. Yamato, Kanagawa, Japan
Jurong, Singapore
65-6-268-6868
fesinfo@molex.com
Munich, Germany
49-89-413092-0
eurinfo@molex.com
2222 Wellington Ct.
Lisle, IL 60532 U.S.A.
630-969-4550
1-800-78MOLEX
81-462-65-2324
amerinfo@molex.com
feninfo@molex.com
Fax: 630-969-1352
Visit our Web site at http://www.molex.com
Doc No: ATS-011030002
Revision: D
Release Date: 04-23-03
Revision Date: 03-26-08
UNCONTROLLED COPY
Page 2 of 2