ZXMS82180S14PQ
Green
IntelliFET HIGH-SIDE POWER SWITCH
Description
Pin Assignment
The ZXMS82180S14PQ is a dual-channel high-side power switch in a
SO-14EP exposed heatsink package incorporating protective and
diagnostic functions.
(Top View)
The device comprises a monolithic n-channel vertical power MOSFET
with integrated temperature and current sensors with a charge-pumped
gate supply and has a low quiescent current in OFF state.
VS
(EP)
The device is enabled by active high 3.3V and 5V logic-level drive to
the inputs. The device includes a diagnostic current-sense output
proportional to load current and a defined diagnostic fault signal in case
of overload operation, overtemperature, short-circuit or open-load
conditions.
Features
SO-14EP
Protection Functions
Reverse Battery Protection Using External Components
Voltage Dependent Current Limiting
Applications
Overtemperature Protection with Auto-Restart
Overvoltage Protection Including Load Dump
Stable Undervoltage Protection
High-side switching with diagnostic feedback for:
.
.
12V grounded loads
Resistive, inductive and capacitive loads
ESD Protection
.
Suitable for high inrush current loads
Incandescent lamps (P5W), motors, LEDs, etc.
Compact low power replacement for:
Relays, fuses and discrete circuits
Loss of Ground Protection with External Components
Enhanced Short-Circuit Protection
.
Diagnostic Functions
.
Proportional Load Current-Sense Output
.
Linear Voltage Drop Regulation to Maintain Sense
Accuracy Even at Very Low Load Currents
Enabled by Logic Input
Summary Specifications
.
.
.
Parameter
Operating Voltage
Symbol
VS
Rating
5V to 28V
41V
Output Channel Selected by Logic Input
Defined Temperature and Current Dependency
Maximum Supply Voltage
Open-Load Detection
VS(LD)
RDS(ON)
IL(NOM)
KILIS
.
.
Using Load Current-Sense in ON State
360mΩ
2A
Maximum ON Resistance, TJ = +150°C
Nominal Load Current
Using Output Voltage Detection in OFF State
Defined Fault Signal in Case of Overload Operation,
Typical Current Sense Ratio
Minimum Current Limitation
Maximum Standby Current, TJ = +25°C
550
Overtemperature, or Short-Circuit and Open-Load in OFF State
8A
IL5(SC)
IS(OFF)
Miscellaneous
0.5µA
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
The ZXMS82180S14PQ is suitable for automotive
applications requiring specific change control; this part is
AEC-Q100 qualified, PPAP capable, and manufactured in
IATF16949 certified facilities.
https://www.diodes.com/quality/product-definitions/
Notes:
1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 34
www.diodes.com
August 2023
© 2023 Copyright Diodes Incorporated. All Rights Reserved.
ZXMS82180S14PQ
Document number: DS45115 Rev. 4 - 2