ZXMS6001N3Q
60V N-CHANNEL SELF PROTECTED ENHANCEMENT MODE
IntelliFET MOSFET
Product Summary
Features and Benefits
Continuous Drain Source Voltage: VDS = 60V
On-State Resistance: 675mΩ
Low Input Current
Short Circuit Protection with Auto Restart
Overvoltage Protection (Active Clamp)
Thermal Shutdown with Auto Restart
Overcurrent Protection
Max Nominal Load Current (VIN = 5V): 1.1A
Min Nominal Load Current (VIN = 5V): 0.7A
Clamping Energy: 550mJ
Input Protection (ESD)
Load Dump Protection (Actively Protects Load)
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Description
The ZXMS6001N3Q is a low input current self-protected low-side
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
PPAP Capable (Note 4)
TM
IntelliFET
MOSFET intended for VIN = 5V applications. It features
monolithic overtemperature, overcurrent, overvoltage (active clamp)
and ESD protected logic level functionality. It is intended as a general
purpose switch.
Mechanical Data
Applications
Case: SOT223 (Type DN)
Especially Suited for Loads with a High In-rush Current Such as
Lamps and Motors
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
All Types of Resistive, Inductive and Capacitive Loads in
Switching Applications
μC Compatible Power Switch for 12V and 24V DC Applications
Automotive Rated
e3
Terminals: Matte Tin Finish
Weight: 0.112 grams (Approximate)
Replaces Electromechanical Relays and Discrete Circuits
Linear Mode Capability: the current-limiting protection circuitry is
designed to deactivate at low VDS to minimize on-state power
dissipation. The maximum DC operating current is therefore
determined by the thermal capability of the package/board
combination, rather than by the protection circuitry. This does not
compromise the product’s ability to self-protect at low VDS
.
SOT223 (Type DN)
Top View
Pin Out
Top View
Note:
The tab is connected to the source pin and must be electrically isolated from the drain pin. Connection of significant copper to the drain pin is recommended
for best thermal performance.
Ordering Information (Note 5)
Part Number
Marking
Reel Size (inches)
Tape Width (mm)
Quantity per Reel
ZXMS6001N3QTA
ZXMS6001
7
12
1,000 Units
Notes:
1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Please refer to https://www.diodes.com/quality/.
5. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/.
IntelliFET is a trademark of Diodes Incorporated.
1 of 9
www.diodes.com
June 2018
© Diodes Incorporated
ZXMS6001N3Q
Document number: DS37146 Rev. 5 - 2