5秒后页面跳转
ZXLD1322DCTC PDF预览

ZXLD1322DCTC

更新时间: 2024-02-18 05:05:13
品牌 Logo 应用领域
捷特科 - ZETEX 转换器稳压器开关式稳压器或控制器电源电路开关式控制器驱动
页数 文件大小 规格书
18页 352K
描述
Buck/boost mode DC-DC converter for LED driving with 700mA output and current control

ZXLD1322DCTC 技术参数

生命周期:Transferred包装说明:HVSON,
Reach Compliance Code:unknownECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.67
Is Samacsys:N其他特性:PFM CONTROL TECHNIQUE ALSO POSSIBLE
模拟集成电路 - 其他类型:SWITCHING REGULATOR控制技术:PULSE WIDTH MODULATION
最大输入电压:15 V最小输入电压:2.5 V
标称输入电压:4 VJESD-30 代码:R-XDSO-N14
长度:4 mm功能数量:1
端子数量:14最高工作温度:125 °C
最低工作温度:-40 °C最大输出电流:3 A
封装主体材料:UNSPECIFIED封装代码:HVSON
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
认证状态:Not Qualified座面最大高度:0.9 mm
表面贴装:YES切换器配置:BUCK-BOOST
最大切换频率:600 kHz温度等级:AUTOMOTIVE
端子形式:NO LEAD端子节距:0.5 mm
端子位置:DUAL宽度:3 mm
Base Number Matches:1

ZXLD1322DCTC 数据手册

 浏览型号ZXLD1322DCTC的Datasheet PDF文件第2页浏览型号ZXLD1322DCTC的Datasheet PDF文件第3页浏览型号ZXLD1322DCTC的Datasheet PDF文件第4页浏览型号ZXLD1322DCTC的Datasheet PDF文件第5页浏览型号ZXLD1322DCTC的Datasheet PDF文件第6页浏览型号ZXLD1322DCTC的Datasheet PDF文件第7页 
ZXLD1322  
Buck/boost mode DC-DC converter for LED driving  
with 700mA output and current control  
Description  
The ZXLD1322 is an inductive DC-DC The feedback control circuitry inside the  
converter, with an internal switch, designed ZXLD1322 provides excellent load and current  
for driving single or multiple LEDs in series up regulation, resulting in very stable LED current  
to a total of 700mA output current.  
over the useful life of the battery and over the  
full operating temperature range.  
Applications cover input voltages ranging  
from 2.5V to 15V. Depending upon supply The LED current can be adjusted from 100%  
voltage and external components, this can down to 10% of the set value by applying a dc  
provide up to 12W of output power.  
voltage to the ADJ pin and down to 1% by  
applying a PWM signal. An on-chip LED  
protection circuit also allows output current to  
be reduced linearly above a predetermined  
threshold temperature using an external  
thermistor at the TADJ pin.  
The device employs a variable 'on' and 'off'  
time control scheme with adjustable peak  
switch current limiting and operates in Buck/  
Boost mode, offering higher power efficiency  
and lower system cost than conventional PFM  
buck/boost circuitry.  
External resistors set nominal average LED  
current and coil peak current independently.  
The device includes the DC-DC converter, a  
high-side current monitor and an NPN The device can be shut down by applying a  
switching transistor to provide an integrated continuous low level dc voltage to the ADJ pin.  
solution offering small PCB size, competitive  
cost/performance, high power efficiency of  
DC-DC conversion and maximum LED  
brightness/reliability. More importantly, it  
retains design flexibility to add customer  
specific features.  
Features  
Applications  
2.5V to 15V Input Voltage Range  
High power LED flashlights  
LED back-up lighting  
Up to 700mA output current  
#
Typical efficiency >80%  
General LED lighting  
User-defined thermal control of LED  
output current using external thermistor  
High output current stability over input  
voltage and temperature  
12µA typical standby current  
LED current adjustable from 100%  
down to 2%  
Adjustable Soft-Start  
Capable of driving 3 LEDs in series  
Note# : Using standard external components as specified under electrical characteristics. Efficiency is dependent upon  
external component types and values. Higher efficiency is possible with alternative coils.  
Issue 1 - January 2008  
© Zetex Semiconductors plc 2008  
1
www.zetex.com  

与ZXLD1322DCTC相关器件

型号 品牌 描述 获取价格 数据表
ZXLD1350 ZETEX 350mA LED driver with internal switch

获取价格

ZXLD1350 DIODES 30V 350mA LED DRIVER with AEC-Q100

获取价格

ZXLD1350_07 ZETEX 350mA LED driver with internal switch

获取价格

ZXLD1350ET5TA ZETEX 350mA LED driver with internal switch

获取价格

ZXLD1350EV3 ZETEX circuit diagram and bill of materials

获取价格

ZXLD1350Q DIODES AUTOMOTIVE COMPLIANT 350mA BUCK LED DRIVER

获取价格