APPLICABLE STANDARD
OPERATING
STORAGE
TEMPERATURE RANGE
-30 C TO +85 C
TEMPERATURE RANGE
-30 C TO +60 C
TO
OPERATING HUMIDITY
RANGE
RATING
VOLTAGE
30V AC
1 A/pin
-
-
①
②
CURRENT
① SIGNAL ONLY
② POWER APPLY
APPLICABLE CABLE
1.8 A/pin(PIN No.1,5)
0.5 A/pin(PIN No.2-4)
-
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
×
×
×
×
MARKING
CONFIRMED VISUALLY.
ELECTRICAL CHARACTERISTICS
CONTACT RESISTANCE 100 mA (DC OR 1000 Hz).
30 m MAX.
100 M MIN.
×
×
INSULATION
500 V DC.
RESISTANCE
×
×
×
×
×
-
VOLTAGE PROOF
100 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
2 pF MAX
MEASURE ADJACENT TWO CONTACTS AT
1000±10Hz AC VOLTAGE.
CAPASITANCE
MECHANICAL CHARACTERISTICS
INSERTION AND
A MAXIMUM RATE OF 12.5mm/min.
INSERTION FORCE
35N MAX
1N MIN.
×
×
-
-
WITHDRAWAL FORCES MEASURED BY APPLICABLE CONNECTOR.
WITHDRAWAL FORCE
① CONTACT RESISTANCE :NO INCREASE
OF MORE THAN 10 m FROM INITIAL
VALUE.
② NO DAMAGE, CRACK AND
LOOSENESS, OF PARTS.
10000 TIMES INSERTIONS AND EXTRACTIONS.
MECHANICAL
OPERATION
MATING SPEED
- MECHANICALLY OPERATED : 500 CYCLES / h
- MANUALLY OPERATED : 200 CYCLES / h
③ INSERTION FORCE
35N MAX
1N MIN.
WITHDRAWAL FORCE
ENVIRONMENTAL CHARACTERISTICS
① CONTACT RESISTANCE : 70 m MAX.
② INSULATION RESISTANCE :10 M MIN.
③ NO DAMAGE, CRACK AND
TEMP
-55 → 15 TO 35 → 85 → 15 TO 35 C
30 → 2 TO 3 → 30 → 2 TO 3 min
TIME
THERMAL SHOCK
×
×
-
UNDER 10 CYCLES.
(MATING APPLICABLE CONNECTOR)
LOOSENESS,OF PARTS.
TEMPERATURE -10~65 C, HUMIDITY 90 TO
98 , UNDER 7 CYCLES (168 h)
(MATING APPLICABLE CONNECTOR)
EXPOSED AT +85±2 C , 96 h.
(MATING APPLICABLE CONNECTOR)
EXPOSED AT -40±2℃, 96h.
NO DAMAGE, CRACK AND LOOSENESS,
OF PARTS.
HUMIDITY LIFE
-
-
-
NO DAMAGE, CRACK AND LOOSENESS,
OF PARTS.
DRY HEAT
COLD
×
×
×
×
×
NO DAMAGE, CRACK AND LOOSENESS,
OF PARTS
(METING APPLICABLE CONNECTOR)
CORROSION SALT MIST EXPOSED AT 5 % SALT WATER, 35 C, FOR 48h. NO HEAVY CORROSION OF CONTACTS.
-
-
(LEFT UNDER UNMATED CONDITION)
SOLDERABILITY
SOLDERING POINT IMMERSED IN SOLDER
BATH OF 255±5℃,5 sec. (USING TYPE R FLAX)
A PROFILE IS SHOWN IN FIG-1, UNDER 2
CYCLES.
SOLDER SHALL COVER MINIMUM OF 95%
OF THE SURFACE BEING IMMERSED.
NO DEFORMATION SIGNIFICANT
LOOSENESS OF CONTACTS.
RESISTANCE TO
SOLDERING HEAT
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
APPROVED
REMARK
NM.NISHIMATSU
15.10.27
15.10.27
15.10.27
15.10.27
HIROSE will not guarantee the performance on these specifications in
case this product will be mated with the others which is not HIROSE’s.
Unless otherwise specified, refer to IEC 60512.
CHECKED
DESIGNED
DRAWN
KN.ICHIKAWA
TS.ITO
AK.AKIYAMA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-127366-31-00
PART NO.
CODE NO.
ZX60-B-5SA(31)
CL242-0064-1-31
SPECIFICATION SHEET
0
△
1/2
HIROSE ELECTRIC CO., LTD.
FORM HD0011-2-1