APPLICABLE STANDARD
USB3.0 SPECIFICATION AND MICRO-USB CABLE AND CONNECTORS SPECIFICATION.
OPERATING
STORAGE
TEMPERATURE RANGE
-30C TO +85C
TEMPERATURE RANGE
-30C TO +60C
- % TO - %
OPERATING
HUMIDITY RANGE
RATING
VOLTAGE
CURRENT
30V AC
1 A / pin
SIGNAL ONLY
APPLICABLE
CABLE
OUTER
DIAMETER
OF
CABLE : φ3.3
POWER APPLY 1.8 A / pin(PIN No.1,No.5)
0.5 A / pin(PIN No.2-No.4)
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
X
X
X
X
ELECTRICAL CHARACTERISTICS
30 m MAX.
CONTACT RESISTANCE
INSULATION RESISTANCE
VOLTAGE PROOF
100 mA (DC OR 1000 Hz).
X
X
X
X
X
X
500 V DC.
1000 M MIN.
100 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
2 pF MAX.
CAPACITANCE
MEASURE ADJACENT TWO CONTACTS AT
X
-
Hz AC VOLTAGE.
1000 10
MECHANICAL CHARACTERISTICS
INSERTION FORCE
35 N MAX.
INSERTION AND
A MAXIMUM RATE OF 12.5 mm/min
-
X
WITHDRAWAL FORCES
WITHDRAWAL FARCE 10 N MIN.(INITIAL)
MEASURED BY APPLICABLE CONNECTOR.
MECHANICAL OPERATION
10000 TIMES INSERTIONS AND EXTRACTIONS.
1) CONTACT RESISTANCE:
NO INCREASE OF MORE THAN 10 m
FROM INITIAL VALUE.
MATING SPEED
- MECHANICALLY OPERATED : 500 CYCLES / h.
2) INSERTION FORCE
WITHDRAWAL FORCE
35 N MAX.
8 N MIN
or
X
-
-
- MANUALLY OPERATED
: 200 CYCLES / h.
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
VIBRATION
FREQUENCY 10 TO 55 Hz
1) NO ELECTRICAL DISCONTINUITY OF
1s.
2) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
SINGLE AMPLITUDE 0.75 mm, AT 2h
FOR 3 AXIAL DIRECTIONS,TOTAL 6h.
FREQUENCY 50 TO 2000 Hz AT 15 min
FOR 3 AXIAL DIRECTIONS.
490 m/s2 DIRECTIONS OF PULSE 11 ms AT 3 TIMES
FOR 6 DIRECTIONS,TOTAL 18 TIMES.
X
X
X
RANDOM VIBRATION
SHOCK
-
-
ENVIRONMENTAL CHARACTERISTICS
THERMAL SHOCK
1) CONTACT RESISTANCE: 70 m MAX.
2) INSULATION RESISTANCE: 100 M MIN.
3) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
TEMP –55 →+15 TO +35→+85→+15 TO+ 35 C
TIME
30 → 2 TO 3 30→ 2 TO 3 min.
UNDER 10 CYCLES.
→
X
X
-
-
(MATING APPLICABLE CONNECTOR)
HUMIDITY LIFE
NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
TEMPERATURE -10~65 C, HUMIDITY 90 TO
98 , UNDER 7 CYCLES (168 h)
(MATING APPLICABLE CONNECTOR)
DRY HEAT
EXPOSED AT
(MATING APPLICABLE CONNECTOR)
EXPOSED AT C, 96 h.
85
2
C, 96 h.
NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
X
X
X
X
-
-
-
-
COLD
40
2
NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
(MATING APPLICABLE CONNECTOR)
CORROSION SALT MIST
SOLDERABILITY
EXPOSED IN 5 % SALT WATER, 35 C, FOR 48h.
(LEFT UNDER UNMATED CONDITION)
NO HEAVY CORROSION.
SOLDERING POINT IMMERSED IN SOLDER BATH
OF 255 5 C,5 sec. (USING TYPE R FRAX)
SOLDER SHALL COVER MINIMUM OF 95 % OF
THE SURFACE BEING IMMERSED.
RESISTANCE TO
SOLDERING HEAT
A PROFILE IS SHOWN IN FIG-1, UNDER 2 CYCLES.
DESCRIPTION OF REVISIONS
NO DEFORMATION OR SIGNIFICANT
LOOSENESS OF CONTACTS.
X
-
COUNT
DESIGNED
CHECKED
DATE
0
△
APPROVED
CHECKED
DESIGNED
DRAWN
REMARK
NM.NISHIMATSU
KN.ICHIKAWA
TS.ITO
15.10.27
15.10.27
15.10.27
15.10.27
HIROSE will not guarantee the performance on these specifications in
case this product will be mated with the others which is not HIROSE’s.
Unless otherwise specified, refer to IEC 60512.
AK.AKIYAMA
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-127029-30-00
PART NO.
CODE NO.
ZX360-B-10S-UNIT(30)
CL242-0501-4-30
SPECIFICATION SHEET
0
△
1/2
HIROSE ELECTRIC CO., LTD.
FORM HD0011-2-1