ZSC31150
Fast Automotive Sensor Signal Conditioner
Datasheet
Brief Description
Benefits
The ZSC31150 is a CMOS integrated circuit for highly accurate
amplification and sensor-specific correction of bridge sensor
signals. Digital compensation of sensor offset, sensitivity,
temperature drift, and non-linearity is accomplished via an internal
16-bit RISC microcontroller running a correction algorithm, with
calibration coefficients stored in an EEPROM.
.
.
.
No external trimming components required
Only a few external protection devices needed
PC-controlled configuration and single pass calibration via
I2C or ZACwire™ interface: simple, cost efficient, quick, and
precise
.
.
End-of-line calibration via I2C or ZACwire™ interface
The ZSC31150 is adjustable to nearly all bridge sensor types.
Measured values are provided at the analog voltage output or at
the digital ZACwire™ and I2C interface. The digital interface can
be used for a simple PC-controlled calibration procedure in order
to program a set of calibration coefficients into an on-chip
EEPROM. A specific sensor and a ZSC31150 can be mated
digitally: fast, precise, and without the cost overhead associated
with trimming by external devices or a laser.
High accuracy (0.25% FSO at -25 to 85°C; 0.5% FSO
at -40°C to 125°C)
.
Excellent EMC/ESD robustness and AEC-Q100 qualification
Available Support
.
.
.
Evaluation Kits
Application Notes
Mass Calibration System
Features
.
Digital compensation of sensor offset, sensitivity,
temperature drift, and non-linearity
Physical Characteristics
.
.
.
Adjustable to nearly all bridge sensor types
Analog gain of up to 420
.
Supply voltage: 4.5V to 5.5V
Output options: ratiometric analog voltage output (5% to 95%
maximum, 12.4-bit resolution) or ZACwire™ (digital one-wire-
interface)
.
Operation temperature: -40°C to 125°C
(-40°C to +150°C extended temperature range)
.
Available as 14-DFN (5 4 mm; wettable flanks), SSOP14,
and die
.
Temperature compensation: internal or external diode, bridge
resistance, thermistor
.
.
.
.
.
.
Sensor biasing by voltage or constant current
Sample rate: up to 7.8kHz
ZSC31150 Application Circuit
High voltage protection up to 33V
Supply current: max. 5.5mA
Out / OWI
GND
Reverse polarity and short-circuit protection
C2
100nF
Wide operation temperature depending on part number: up to
-40°C to +150°C
8
7
6
5
4
3
2
1
VSSE
AOUT
VBN
VDDE
VDD
n.c.
VSUPP
+4.5V to +5.5V
C3
47nF
9
Sensor Bridge
.
.
Traceability by user-defined EEPROM entries
Safety and diagnostic functions
10
11
12
13
14
VBR_B
VBP
SCL
SCL
Serial Interface
SDA
SDA
VBR_T
IRTEMP
VSSA
VDDA
C4
C5
C1
100nF
Temperature Sensor
© 2016 Integrated Device Technology, Inc.
1
December 6, 2016