ZMY3V9 to ZMY100
Vishay Semiconductors
www.vishay.com
Zener Diodes
FEATURES
• Silicon planar power Zener diodes
• For use in stablilizing and clipping circuits with
high power rating
• The Zener voltages are graded according to the
international E 24 standard. Smaller voltage
tolerances are available upon request
• These diodes are also available in the DO-41
case with the type designation ZPY3V9 to ZPY100
DESIGN SUPPORT TOOLS AVAILABLE
• AEC-Q101 qualified
3
D
3D Models
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
PARAMETER
VALUE
3.9 to 100
5 to 100
UNIT
V
VZ range nom.
Test current IZT
VZ specification
Circuit configuration
mA
Pulse current
Single
ORDERING INFORMATION
DEVICE NAME
ORDERING CODE
TAPED UNITS PER REEL
5 000 (12 mm tape on 13" reel)
1 500 (12 mm tape on 7" reel)
MINIMUM ORDER QUANTITY
10 000/box
ZMY3V9 to ZMY100
ZMY3V9 to ZMY100-series-GS18
ZMY3V9 to ZMY100-series-GS08
ZMY3V9 to ZMY100
12 000/box
PACKAGE
MOLDING COMPOUND
WEIGHT
MOISTURE SENSITIVITY
LEVEL
PACKAGE NAME
SOLDERING CONDITIONS
FLAMMABILITY RATING
MSL level 1
(according J-STD-020)
MELF (DO-213AB) glass
135 mg
UL 94 V-0
Peak temperature max. 260 °C
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Valid provided that electrodes are kept at
ambient temperature
Power dissipation
Zener current
Ptot
1000
mW
See table “Characteristics”
Valid provided that electrodes are kept at
ambient temperature
Junction to ambient air
RthJA
170
K/W
Junction to ambient case
RthJC
Tj
60
175
K/W
°C
Junction temperature, maximum
Storage temperature range
Tstg
-55 to +175
°C
Rev. 2.0, 12-Mar-2019
Document Number: 85788
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000