ZL30136
GbE and Telecom Rate
Network Interface Synchronizer
Data Sheet
October 2015
Features
Ordering Information
•
Provides synchronous clocks for network interface
ZL30136GGG
ZL30136GGG2 64 Pin CABGA*
64 Pin CABGA
Trays
Trays
cards that support synchronous Ethernet (SyncE)
in addition to telecom interfaces (T1/E1, DS3/E3,
etc.)
*Pb Free Tin/Silver/Copper
-40C to +85C
•
•
Supports the requirements of ITU-T G.8262 for
Synchronous Ethernet equipment slave clocks
(EEC option 1 and 2)
•
•
Supports automatic hitless reference switching
and short term holdover during loss of reference
inputs
Synchronizes to telecom reference clocks (2 kHz,
N*8 kHz up to 77.76 MHz) or to Ethernet reference
clocks (25 MHz, 50 MHz, 62.5 MHz, 125 MHz, and
155.52 MHz)
DPLL can be configured to provide synchronous or
asynchronous clock outputs
•
•
Generates Ethernet clocks (12.5 MHz, 25 MHz,
50 MHz, 62.5 MHz, or 125 MHz)
2
•
•
Configurable through a serial interface (SPI or I C)
Supports IEEE 1149.1 JTAG Boundary Scan
Programmable telecom synthesizer generates
clock frequencies of any multiple of 8 kHz up to
100 MHz
Applications
•
•
•
•
Selectable loop bandwidth of 14 Hz, 28 Hz, 890 Hz,
or 0.1 Hz
•
GbE network interface cards that support
synchronous Ethernet (SyncE)
Generates several styles of output frame pulses
with selectable pulse width, polarity and frequency
•
•
•
GPON ONT/ONU
T1/E1 line cards
DS3/E3 line cards
Provides 3 sync inputs for output frame pulse
alignment
Flexible input reference monitoring automatically
disqualifies references based on frequency and
phase irregularities
Figure 1 - Functional Block Diagram
1
Copyright 2015, Microsemi Corporation All Rights Reserved.