ZIOL2401
Feature Sheet
Dual-Channel IO-Link HV Line Driver
with Integrated DC/DC Converter
Brief Description
Benefits
The ZIOL2401 is a line driver/level shifter IC that
provides two independent HV* I/O channels with a
wide range of configurable system features. It
addresses the physical layer of sensor/actuator
systems in factory automation applications and is
specifically designed to support the communication
•
•
•
Configurable feature set
Nonvolatile storage of system configuration
Excellent electromagnetic compatibility (EMC)
performance due to adjustable output slew rate
control
•
•
•
•
Low RDSon of 3.3Ω in tandem mode
Programmable limitation of driver output current
DC/DC converter on-chip
†
standard IO-Link .
The output drivers are push-pull stages, which in
tandem mode reach an RDSon of less than 3.3Ω at all
operational temperatures.
EEPROM read/write functionality within full
operating temperature range
The configuration is stored in an on-chip EEPROM
and automatically loaded into the ZIOL2401’s control
register during power up. The ZIOL2401 also
provides status information, such as overload and
over-temperature conditions. An integrated SPI inter-
face supports access to configuration and status
registers.
•
Space saving 4x4mm² 24-pin QFN
Available Support
•
•
Evaluation Kits
Application Notes
The ZIOL2401 is fabricated in a powerful CMOS
mixed-signal technology that allows supply voltages
up to 40V. The EEPROM read/write functionality is
guaranteed within the full operating temperature
range in combination with a low-voltage core supply
of 3.3V.
Physical Characteristics
•
•
•
Operation temperature: -40 to +85 °C
Supply voltage 8.0V to 36.0V
RoHS-compliant QFN 24 (4x4 mm) package
Features
ZIOL2401 Application Circuits
•
Configurable output current limitation 56mA to
410mA per channel
SIO
sensor
ZIOL2401
Traditional PLC
•
Standard cable driver/ physical layer transceiver
for IO-Link (master and device)
•
•
Slew-rate controlled drivers
IO-L
IO-L
sensor
ZIOL2401
ZIOL2401
ZIOL24x1
ZIOL24x1
Wide range for configurable feature set, which is
automatically loaded after power on reset
•
•
•
Onboard DC/DC converter
IO-Link-specific WURQ‡ detection
actuator
IO-Link
PLC
(master)
On-chip registers and EEPROM for system
configuration and status information
IO-L
sensor
sensor
ZIOL2401
ZIOL2401
ZIOL24x1
•
SPI interface for accessing on-chip registers and
EEPROM
•
•
•
Digital interface: 3.3V output, 5V tolerant inputs
IC temperature monitoring/diagnosis
Over-current and over-temperature indication
* High Voltage (max. power supply / signal swing is 36 volt)
† IDT is a member of the IO-Link Community: www.io-link.com
‡ IO-Link device wake-up
© 2016 Integrated Device Technology, Inc.
1
January 27, 2016