APPLICABLE STANDARD
OPERATING
STORAGE
-40 C TO +125 C
-10 C TO +60 C (1)
RELATIVE HUMIDITY 85% MAX
(NOT DEWED)
TEMPERATURE RANGE
TEMPERATURE RANGE
RATING
60 V AC/DC
VOLTAGE
CURRENT
STORAGE
HUMIDITY RANGE
2
A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
×
×
×
×
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
CONTACT RESISTANCE
MILLIVOLT LEVEL METHOD
INSULATION RESISTANCE
1A DC.
10 mΩ MAX .
10 mΩ MAX .
-
-
-
-
10 mV AC MAX, 0.1 mA(DC OR 1000Hz)
×
-
-
-
500 V DC.
100 MΩ MIN.
VOLTAGE PROOF
1000 V AC FOR 1 min.
NO BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
① CONTACT RESISTANCE: 20 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
-
×
-
-
30 TIMES INSERTIONS AND EXTRACTIONS.
VIBRATION
FREQUENCY 20 TO 200Hz (44m/s2)
SWEEP TIME 3min.(ROUND TRIP)
AT 3h FOR 3 DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF 7MIN ,
1s MIN.
② CONTACT RESISTANCE: 20 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
-
-
-
×
-
-
SHOCK
981m/s2 DURATION OF PULSE 6ms AT 3 TIMES
FOR 6 DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF 7MIN ,
1s MIN.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
-
×
×
-
-
-
LOCK STRENGTH
MEASURE BREAK STRENGTH OF THE LOCK BY ① 100N MIN.
PULLING THE CONNECTOR IN THE MATING
DIRECTION.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
① CONTACT RESISTANCE: 20 m MAX.
② INSULATION RESISTANCE:100 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
EXPOSED AT 60 C, 90 ~ 95 %, 96 h.
-
×
×
-
-
-
(STEADY STATE)
RAPID CHANGE OF
TEMPERATURE
① CONTACT RESISTANCE: 20 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
TEMPERATURE- 40 →ROOM TEMP →125C→
ROOM TEMP
-
×
-
-
TIME
30 →
5 → 30 → 5 min
UNDER 1000 CYCLES.
DRY HEAT
EXPOSED AT 140C, 120 h.
① CONTACT RESISTANCE: 20 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
-
×
-
-
COLD
EXPOSED AT -40C , 120 h.
① CONTACT RESISTANCE: 20 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS OF
PARTS.
-
×
-
-
RESISTANCE TO SO2 GAS
EXPOSED IN 25 PPM AT 75% MIN FOR 96h.
① CONTACT RESISTANCE: 20 m MAX.
-
-
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
AH.EDASHIGE
AH.EDASHIGE
KH.MARUNO
20211026
20211026
20211025
20211025
(NOTE1) "STORAGE" means a long-term storage state for the unused product.
YANG CHUAN XING
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-395114-00-00
ZH05-24DP-R
SPECIFICATION SHEET
0
△
1/1
HIROSE ELECTRIC CO., LTD.
CL0756-2213-0-00
FORM HD0011-2-1