YFW-XX-XX-X-XX-XSB-XX
No OF POSITIONS
C2
REVISION X
(No OF POS x .0500[1.270]) + .100[2.54]
OPTION
C3
-20 THRU -50
(MULTIPLES OF 10 ONLY)
-K: KAPTON PAD (SEE FIG. 3)
(AVAILABLE ON -07, -09 & -12
MATED STACKS ONLY)
**
DO NOT
SCALE FROM
THIS PRINT
(No OF POS -1) x .050[1.27]
[TOL NON-ACCUM]
-TR: TAPE & REEL
[STACK HEIGHT -07 & -09: ALL POSITIONS
-12: POSITIONS UP TO 40x10
-19 & -25: NOT AVAILABLE]
-P: PICK AND PLACE PAD (SEE FIG 4)
MATED STACK HEIGHT w/ YFS
.040 1.02 REF
.035 0.889 REF
-07: 7mm
-09: 9mm
-12: 12mm
-19: 19mm (SEE FIG. 2)
-25: 25mm (SEE FIG. 2)
SOLDER BALLS
-SB: SOLDER BALLS (USE SDB-030-6337)
-MSB: MODIFIED SOLDER BALLS- Pb FREE
(USE SDB-030-9653)
*
C4
(No OF ROWS -1)
x .050[1.27]
[TOL NON-
PLATING SPECIFICATION
(No OF ROWS
x .0500[1.270])
+ .120[3.05]
ROW SPECIFICATION
-05: FIVE ROWS
-08: EIGHT ROWS
(AVAILABLE ON -07, -09 & -12
MATED STACKS ONLY)
-10: TEN ROWS
-H: HEAVY GOLD
(USE T-1R2X-XXB-H-1)
-E: EXTRA GOLD
ACCUM]
(USE T-1R2X-XXB-E-1)
** DO NOT DESIGN IN FOR 10-ROW VERSION. ONLY EXISTING
CUSTOMERS, AS OF 2/10/06, WILL BE SUPPORTED. -P OPTION
SHOULD BE USED FOR 10-ROW VERSION.
.155 3.937 REF
.105 2.667 REF
02
01
2.75 MAX SWAY
11 ( PIN # = NO OF ROWS + 1)
= NOT RELEASE FOR
PRODUCTION.
(ANY DIRECTION) C7
*
T-1R2X-XXB-X-1
(SEE TABLE 3)
"A" REF
YFTS-XX-XX-XX
"A"
.083 2.11 REF
C6
.100 2.54 REF
"C"
REF
"D"
"B" REF
C5
(SEE TABLE 2)
SEE TABLE 1
C8
.0100 0.254
"A"
YFTHS-XX-XX-X
SDB-030-XXXX
'A'
FIG 1
SECTION "A-A"
YFW-20-07-X-10-SB SHOWN
[STACK HEIGHT -09 & -12 SIMILAR]
.016 0.41 REF
DETAIL 'A'
SCALE 10 : 1
[SOLDER BALL REMOVED
FOR CLARITY]
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: .0015[.038] MAX.
3. MINIMUM PUSHOUT FORCE; PRE-PROCESS: 8 OZ, POST-PROCESS: 5 OZ.
4. MAXIMUM ALLOWABLE BOW; TOP/BOTTOM: .006[.15], SIDE/SIDE: .003[.08].
5. ALL DIMS TO BE SYMMETRICAL ABOUT CENTERLINE WITHIN .002[.05].
6. BODY RETENTION BETWEEN WELDED BODIES TO BE 4 LBS MINIMUM TOTAL.
7. WELD FLASH: .020[.51] MAX.
8. -H PLATING MAY BE SUBSTITUTED FOR -G PLATING.
9. NOTE DELETED.
C1
X
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
TOLERANCES ARE:
DECIMALS
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
ANGLES
2
.XX: .01[.3]
.XXX: .005[.13]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
.XXXX: .0020[.051]
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
SHEET SCALE: 1.875:1
INSULATOR: LCP, COLOR: BLACK
TERMINAL: BRASS
SOLDER BALL: 63% TIN/ 37% LEAD
FleX, Y, Z, .050 CENTERLINE TERMINAL ASSEMBLY
NO. YFW-XX-XX-X-XX-XSB-XX
DWG.
BY:
DEAN P
5/11/2001
SHEET 1 OF 4
F:\DWG\MISC\MKTG\YFW-XX-XX-X-XX-XSB-XX-MKT.SLDDRW