DSMZ (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Bulk Metal® Z-Foil Surface Mount Voltage
Divider, TCR Tracking of < 0.1 ppm/°C, PCR of ꢀ ppm
at Rated Power and Stability of 0.00ꢀ ꢁ (ꢀ0 ppm)
FEATURES
• Temperature Coefficient of Resistance (TCR):
Absolute: 0.05 ppm/°C typical (0 °C to + 60 °C)
0.2 ppm/°C typical
Pb-free
Available
(- 55 °C to + 125 °C, + 25 °C Ref.)
Tracking: 0.1 ppm/°C typical
RoHS*
COMPLIANT
Any value at any ratio available within resistance range
• Power Coefficient Tracking
“ΔR due to self heating”: 5 ppm at Rated Power
• Power Rating at 70 °C: Entire Package: 0.1 W
Each Resistor: 0.05 W
• Tolerance: Absolute: 0.02 %; Match: 0.01 %
• Ratio Stability: 0.005 % (0.05 W at 70 °C, 2000 hours)
• Resistance Range: 100 Ω to 10 kΩ per resistor
• Large Variety of Resistance Ratios: 1:100
• Electrostatic Discharge (ESD) above 25 000 V
• Short Time Overload ≤ 0.005 %
• Non Inductive, Non Capacitive Design
• Rise Time: 1.0 ns without ringing
• Current Noise: < - 40 dB
• Thermal EMF: 0.05 µV/°C typical
• Voltage Coefficient: < 0.1 ppm/V
INTRODUCTION
Bulk Metal® Z-Foil Technology out-performs all other resistor
technologies available today for applications that require
ultra-high precision and ultra-high stabilitly.
The Z-Foil technology provides a significant reduction of the
resistive element’s sensitivity to ambient temperature
variations (TCR) and to self heating when power is applied
(power coefficient).
The DSMZ offers low TCR (both absolute and tracking), low
PCR, excellent load life stability, tight tolerance match,
excellent ratio stability, low thermal EMF, and low current
noise - all in one package.
The DSMZ surface mount divider provides a matched pair of
Bulk Metal® Z-Foil Resistors in a small epoxy molded
package. The electrical specification of this integrated
construction offers improved performance and better real
estate utilization over discrete resistors and matched pairs.
• Non Inductive: < 0.08 µH
• Non Hot Spot Design
• Terminals: silver coated copper alloy
• For better performances, please contact Application
Engineering
Our Application Engineering Department is available to advise
and make recommendations. For non-standard technical
requirements and special applications, please contact us.
APPLICATIONS
R2
TABLE 1 - RESISTANCE VALUES AND TOLERANCES1)
RESISTANCE VALUES
• Instrumentation amplifiers
• Bridge networks
100 Ω - 10 kΩ per resistor2)
R1
Vin
-
ABSOLUTE TOLERANCE
EACH RESISTOR
• Differential amplifiers
• Ratio arms in bridge circuits
• Medical and test equipment
• Military
Vout
0.02 %, 0.05 %, 0.1 %
+
DSMZ
RESISTANCE
TOLERANCE MATCH
0.01 %, 0.02 %, 0.05 %
Absolute: (typical and maximum
spread): 0.2 2.0 ppm/°C
TCR
• Airborne etc.
Tracking: (maximum)
- 55 °C to + 125 °C
(+ 25 °C reference)
For R1/R2 = 1
0.5 ppm/°C
1.0 ppm/°C
FIGURE 2 - POWER DERATING CURVE
For 1 < R1/R2 ≤ 10
110
100
90
80
70
60
50
40
30
20
10
0
For 10 < R1/R2 ≤ 100 2.0 ppm/°C
Notes
1. Tighter performances are available
2. 100 Ω to 20 kΩ per resistor available in DSM
FIGURE 1 - SCHEMATIC
R1
R2
- 60 - 40 - 20
- 55
0
20
40
60
80 100 120 140
OPTION 1
SAME OHMIC VALUE,
OPTION 2
70
125
RESISTOR PAIR
Ambient Temperature (°C)
SAME ABSOLUTE TOLERANCE
R1/R2 - DIFFERENT VALUES
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63121
Revision: 06-Aug-07
For any questions, contact: foil@vishay.com
www.vishay.com
1