VSH, VSC
Bulk Metal® Foil Technology Low Profile Conformally Coated High
Precision Resistor with Tight Tolerance from ± 0.01 % and Load Life
Stability of ± 0.01 % and Instantaneous Thermal Stabilization
FEATURES
Temperature coefficient of resistance (TCR):
± 2.0 ppm/°C typical (- 55 °C to + 125 °C,
+ 25 °C ref.) (see table 1)
Tolerance: to ± 0.01 %
Power rating: to 300 mW at + 70 °C
Load life stability: to ± 0.01 % at 70 °C, 2000 h at rated
power
Resistance range: 5 to 120 k (for higher and lower
values, please contact us)
INTRODUCTION
Bulk Metal® Foil (BMF) technology out-performs all other
resistor technologies available today for applications that
require high precision and high stability, and allows
production of customer oriented products designed to satisfy
challenging and specific technical requirements.
Vishay Foil resistors are not restricted to standard values;
specific “as required” values can be supplied at no extra
cost or delivery (e.g. 1K2345 vs. 1K)
Thermal stabilization time < 1 s
Electrostatic discharge (ESD) up to 25 000 V
Short time overload: 0.01 %
Maximum working voltage: 300 V
Non inductive, non capacitive design
Rise time: 1 ns effectively no ringing
Current noise: < - 42 dB
The BMF provides an inherently low and predictable
Temperature Coefficient of Resistance (TCR) and excellent
load life stability for high precision analog applications.
Model VSH offers low TCR, excellent load life stability, tight
tolerance, excellent shelf life stability, low current noise and
low voltage coefficient, all in the same resistor.
Our application engineering department is available to
advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us using the e-mail address in the footer below.
Voltage coefficient < 0.1 ppm/V
Non inductive: < 0.08 µH
Non hot spot design
Terminal finish: lead (Pb)-free or tin/lead alloy
Matched sets are available per request
Compliant to RoHS directive 2002/95/EC
FIGURE 1 - STANDARD IMPRINTING AND
DIMENSIONS in millimeters
Resistance value code
Prototype quantities available in just 5 working days
or sooner. For more information, please contact
foil@vpgsensors.com
T
L
Tolerance
symbol
VSH1
9220
10K0
T TCR
H
For better performances please review Z201 and S102C
Series datasheets
DATE CODE
92
20
YEAR WEEK
25.4
(1.0 min.)
APPLICATIONS
Automatic test equipment (ATE)
High precision instrumentation
Laboratory, industrial and medical
Audio
EB applications (electron beam scanning and recording
equipment, electron microscopes)
LS
Lead material #22 AWG (0.025 diameter)
solder coated copper
L
H
T
LS
5.08 ± 0.25
VSH1
VSC1
VSH2
(0.200 ± 0.01)
5.8 ± 0.5
5.5 ± 1
2.2 ± 0.5
(0.228 ± 0.02) (0.216 ± 0.04) (0.086 ± 0.02)
3.81 ± 0.25
(0.150 ± 0.01)
Commercial aviation
Airborne
Down hole instrumentation
Communication
5.08 ± 0.25
(0.200 ± 0.01)
6.7 ± 0.5
8 ± 1
2.78 ± 0.5
(0.263 ± 0.02) (0.315 ± 0.04) (0.110 ± 0.02)
3.81 ± 0.25
(0.150 ± 0.01)
VSC2
Note
• Letters H and C indicate a difference in lead spacing and -2 is an
extension range
Document Number: 63087
Revision: 3-Mar-15
For any questions, contact
foil@vpgsensors.com
www.vishayfoilresistors.com
1