XRT7295AE
E3 (34.368Mbps)
Integrated line Receiver
March 2003
APPLICATIONS
FEATURES
l Interface to E3 Networks
l CSU/DSUEquipment
l PCM Test Equipment
l Fiber Optic Terminals
l Multiplexers
l Fully Integrated Receive Interface for E3
Signals
l Integrated Equalization (Optional) and Timing
Recovery
l Loss-of-Signal and Loss-of-Lock Alarms
l Variable Input Sensitivity Control
l 5V Power Supply
l Compliant with G703, G.775 and G.824 Specifi-
cations
GENERALDESCRIPTION
TheXRT7295AEE3IntegratedLineReceiverisafully
integrates receive interface that terminates a bipolar
E3 (34.3684 Mbps) signal transmitted over coaxial
Cable. This device can be used with the XRT7296
Integrated Line Transmitter (see Figure 10),
losses of 0 to 15dB. The receive input has a variable
input sensitivity control, providing three different sen-
sitivity settings. High input sensitivity allows for signifi-
cant amounts of flat loss or for use with input signals
at the monitor level. Figure 1 shows the block diagram
of the device.
Thedeviceprovidesthefunctionsofreceiveequaliza-
tion (optional) automatic gain control (AGC), clock
recovery and data re-timing, loss of signal and loss-of
frequency lock detection. The digital system interface
is a dual-rail with received positive and negative 1s
appearingasunipolardigitalsignalsonseparateoutput
leads. The on-chip equalizer is designed for cable
The XRT7295AE is manufactured by using linear
CMOS technology. The XRT7295AE is available in a
20-pinplasticSOJpackageforsurfacemounting.Apin
compatible version is available for DS3 or STS-1
applications. Please refer to the XRT7295AT data
sheet
ORDERING INFORMATION
Operating
Part No.
Package
20 J-lead 300 MIL JEDEC SOJ
Temperature Range
XRT7295AEIW
-40°C to +85°C
Rev. 2.0.0
EXAR Corporation, 48720 Kato Road, Fremont, CA 94538 • (510) 668-7000 • FAX (510) 668-7017