Datasheet > 微控制器和处理器 > DSP 外围设备> XRS10L210IL-F

XRS10L210IL-F

更新时间： 2024-11-28 07:07:23

品牌	Logo	应用领域
艾科嘉 - EXAR		DSP外围设备微控制器和处理器外围集成电路
页数	文件大小	规格书
37页	431K
描述
SERIAL ATA II: PORT SELECTOR

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

XRS10L210IL-F 技术参数

是否Rohs认证：	符合	生命周期：	Obsolete
零件包装代码：	QFN	包装说明：	HVQCCN, LCC64,.35SQ,20
针数：	64	Reach Compliance Code：	compliant
风险等级：	5.84	Is Samacsys：	N
边界扫描：	YES	JESD-30 代码：	S-PQCC-N64
JESD-609代码：	e3	长度：	9 mm
低功率模式：	YES	端子数量：	64
最高工作温度：	85 °C	最低工作温度：	-40 °C
封装主体材料：	PLASTIC/EPOXY	封装代码：	HVQCCN
封装等效代码：	LCC64,.35SQ,20	封装形状：	SQUARE
封装形式：	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	峰值回流温度（摄氏度）：	NOT SPECIFIED
电源：	1.2 V	认证状态：	Not Qualified
座面最大高度：	1 mm	子类别：	Serial IO/Communication Controllers
最大供电电压：	1.26 V	最小供电电压：	1.14 V
标称供电电压：	1.2 V	表面贴装：	YES
技术：	CMOS	温度等级：	INDUSTRIAL
端子面层：	Matte Tin (Sn)	端子形式：	NO LEAD
端子节距：	0.5 mm	端子位置：	QUAD
处于峰值回流温度下的最长时间：	NOT SPECIFIED	宽度：	9 mm
uPs/uCs/外围集成电路类型：	DSP PERIPHERAL, MULTIPLIER	Base Number Matches：	1

XRS10L210IL-F 数据手册

EXSTOR - 1 XRS10L210

SERIAL ATA II: PORT SELECTOR

REV. 1.04

DECEMBER 2008

FEATURES

applications. The integration of Serial ATA PHY links,

a variety of digital logic capabilities, rate adjust

FIFOs, integrated low-cost clock oscillator support,

test and loopback features is achieved in a low cost

and lower power implementation.

•

ENERAL FEATURES

Three independent 3/1.5Gbps SATA ports.

Connects 2 host ports to 1 device port.

•

The port selector function is used when dual hosts,

such as I/O controllers, must access single-port disk

drives in high availability storage subsystems where

redundancy and load sharing are important. The

outputs from the I/O controllers are multiplexed to a

Serial ATA drive through the port selector block of the

XRS10L210. Active/passive port selector in

XRS10L210 allows two different host ports to connect

to the same target in order to create a redundant path

to that target. In combination with RAID, the

XRS10L210 allows system providers to build fully

redundant solutions. This avoids the presence of a

single point of failure, and enables a fail-over path in

the case of host failure.

•

Supports 3/1.5Gbps rate detection/speed

negotiation.

•

Supports power down modes - Active, partial,

slumber and power down.

Advanced features configurable through MDIO

bus.

ORT MULTIPLIER/SELECTOR LOGIC FEATURES

•

Low latency architecture.

•

Supports OOB signaling for SATA applications.

Internal OOB detectors for COMRESET/

COMINIT and COMWAKE.

The XRS10L210 includes enhanced features such as

staggered HDD spin-up, power management control,

hot plug capability and support for legacy software.

The XRS10L210 acts as a retimer, maintaining

independent signaling domains between the drives,

hosts and the external interconnect.

IGH SPEED I/O FEATURES

•

High speed outputs with programmable pre-

emphasis to drive long interconnects.

•

Selectable high speed input equalization for

optimum reception.

The high-speed serial input feature:

selectable

Compliant with SATA Gen-2i

specification.

Gen-2m

equalization adjustment and the high-speed serial

output feature: programmable pre-emphasis can be

used to compensate for ISI (Inter-Symbol

Enables reliable data transmission over 1 meter

of FR-4 and 4 meters or more of unequalized Interference) and increase maximum cable distances.

copper cable.

XRS10L210 meets tight jitter budgets in SATA

•

Supports spread spectrum clocking (SSC) to

reduce EMI.

applications. Exar's serial I/O technology enables

reliable data transmission over 1 meter of FR-4 and 4

meters of unequalized copper cable.

•

HYSICAL FEATURES

Host and drive port speeds can be mixed and

matched, based upon inherent data rate negotiation

present in the SATA II specifications.

CMOS 0.13 Micron Technology

Single 1.2 V Power Supply

The MDIO bus allows simple configuration of the

XRS10L210 when needed. Receive equalization,

transmit amplitude and pre-emphasis and SSC

control are all configurable via the 2-wire MDIO

interface.

-40°C to 85°C Industrial Temperature Range

No heatsink or airflow required

64-QFN and 100-Pin LQFP Package

1.0 INTRODUCTION

To summarize, the port selector functionality in the

XRS10L210 allows replacement for expensive Fibre

Channel drives with cost effective and high capacity

SATA drives in enterprise class applications without

compromising on redundancy or performance.

The XRS10L210 is a Serial ATA II Port Selector at 3.0

Gbps and 1.5 Gbps. It provides a failover path from

two independent hosts to a single SATA drive and

offers a leading solution for propagation of high data

rate Serial ATA products in a wide variety of

Exar Corporation 48720 Kato Road, Fremont CA, 94538 • (510) 668-7000 • FAX (510) 668-7017 • www.exar.com

12 3 4 5 6 7...37

中文翻译

下载PDF

与XRS10L210IL-F相关器件

型号	品牌	获取价格	描述	数据表
XRS10L210IV	EXAR	获取价格	SERIAL ATA II: PORT SELECTOR
XRS10L210IV-F	EXAR	获取价格	SERIAL ATA II: PORT SELECTOR
XRS10L220	EXAR	获取价格	SERIAL ATA II: PORT MULTIPLIER / PORT SELECTOR
XRS10L220IV	EXAR	获取价格	SERIAL ATA II: PORT MULTIPLIER / PORT SELECTOR
XRS10L220IV-F	EXAR	获取价格	SERIAL ATA II: PORT MULTIPLIER / PORT SELECTOR
XRS10L240	EXAR	获取价格	SERIAL ATA II: PORT MULTIPLIER / PORT SELECTOR
XRS10L240IV	EXAR	获取价格	SERIAL ATA II: PORT MULTIPLIER / PORT SELECTOR
XRS10L240IV-F	EXAR	获取价格	SERIAL ATA II: PORT MULTIPLIER / PORT SELECTOR
XRS10L620	EXAR	获取价格	PCI-X to 2-SATA/1-PATA Host Controller
XRS10L620CVF	EXAR	获取价格	PCI-X to 2-SATA/1-PATA Host Controller

与XRS10L210IL-F相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

47
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

35
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

65
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

61

产品中心

服务支持

精选活动

关于我们

帮助中心

XRS10L210IL-F

XRS10L210IL-F 技术参数

XRS10L210IL-F 数据手册

与XRS10L210IL-F相关器件

与XRS10L210IL-F相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

XRS10L210IL-F

XRS10L210IL-F 技术参数

XRS10L210IL-F 数据手册

与XRS10L210IL-F相关器件

与XRS10L210IL-F相关文章

您还可以找

您在本页遇到什么问题？