10.0-18.0 GHz GaAs Receiver
QFN, 7x7 mm
November 2010 - Rev 14-Nov-10
R1007-QD
Features
Integrated LNA, LO Buffer, Image Reject Mixer
7x7 mm, QFN
+2.0 dBm LO Drive Level
2.7 dB Noise Figure
20.0 dB Image Rejection
100% RF, DC and Noise Figure Testing
General Description
Mimix Broadband’s 10.0-18.0 GHz GaAs packaged receiver has a
noise figure of 2.7 dB and 20.0 dB image rejection across the
band.This device is a two stage LNA followed by an image reject
mixer which includes an integrated LO buffer amplifer.The
image reject mixer eliminates the need for a bandpass filter
after the LNA to remove thermal noise at the image frequency. I
and Q mixer outputs are provided and an external 90 degree
hybrid is required to select the desired sideband. This device
uses Mimix Broadband’s GaAs PHEMT device model technology,
and is based upon electron beam lithography to ensure high
repeatability and uniformity.The device comes in a 7x7 mm QFN
Surface Mount Laminate Package offering excellent RF and
thermal properties and is RoHS compliant. This device is well
suited for Millimeter-wave Point-to-Point Radio, LMDS, SATCOM
and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
+5.0 VDC
Supply Current (Id1,Id2)
Gate Bias Voltage (Vg)
Input Power (RF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
Moisture Sensitivity Level
200, 250 mA
+0.3 VDC
+17 dBm
-65 to +165 OC
3
-55 to MTTF Table
3
MTTF Table
MSL3
(3) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (AmbientTemperatureT = 25o C)
Parameter
Frequency Range (RF) Upper Side Band
Frequency Range (LO)
Frequency Range (IF)
Input Return Loss RF (S11)
Small Signal Conversion Gain RF/IF
LO Input Drive (PLO)
Image Rejection2
Noise Figure (NF)2
Units
GHz
GHz
GHz
dB
Typ.
-
-
Max.
18.0
20.0
4.0
-
-
-
-
-
Min.
10.0
8.0
DC
-
-
-
-
-
15.0
13.5
+2.0
20.0
2.7
dB
dBm
dBc
dB
-
dB
40.0
+4.0
+4.0
+4.0
-0.3
80
-
-
Isolation LO/RF @ LOx1/LOx2
Input Third Order Intercept (IIP3)1,2
Drain Bias Voltage (Vd1)
Drain Bias Voltage (Vd2)
Gate Bias Voltage (Vg1,2)
-
-
-
-
dBm
VDC
VDC
VDC
mA
+4.5
+4.5
+0.1
120
150
-1.2
-
-
Supply Current (Id1) (Vd1=4.0V,Vg=-0.3V Typical)
Supply Current (Id2) (Vd2=4.0V,Vg=-0.3V Typical)
100
mA
(1) Measured using constant current.
(2) Measured using LO Input drive level of +2.0 dBm.
Page 1 of 7
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
