Datasheet > XHP-20

XHP-20

更新时间： 2025-04-16 01:21:59

品牌	Logo	应用领域
NEWHAVEN		连接器
页数	文件大小	规格书
9页	229K
描述
XH CONNECTOR

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

XHP-20 数据手册

Emboss Tape

Radial Tape

Crimp

XHCONNECTOR

Disconnectable Crimp style connectors

2.5mm

(.098") pitch

Features ––––––––––––––––––––––––

• Original folded beam contact

The protected, folded beam contact in this connector provides

high contact pressure with an over-stress stop feature. This

ensures dependable continuity when used with low voltage,

low current carrying circuits (dry circuits). The wire crimp

section is mechanically decoupled from the post insertion

section which, in turn, prevents the mating area from being

adversely affected by crimping.

• Box-shaped shrouded header

The four-sided, box-shaped shroud prevents the receptacle

from being misinserted or pried during insertion and removal.

The shroud also prevents foreign matter from reaching the

posts and resists contact deformation due to handling and

shipping. Furthermore, a serrated, oversized square post is

pressure-fit into each square hole to completely protect the

post against heat and to prevent flux from entering during dip

soldering.

• Header with a boss

This header has a boss (projection) on the bottom of the

housing to prevent improper insertion in printed circuit boards.

• Interchangeability

This header is interchangeable with those of 2.5mm (.098")

pitch insulation displacement NR and NRD connectors and

board-to-board JQ connectors.

The XH connector was developed based

on the high reliability and versatility of our

NH series connectors. The connector is

very small with a mounting height of

9.8mm (.386"). Yet it meets the needs for

high-density mounting and miniaturization

of electronic equipment, including VCRs,

radio-cassette players, and car stereo

systems.

• Conforming to the HA terminal

The 4-circuit XH connector conforms to the HA terminal

specified in JEM 1427 (Japanese Electric Machine Industry

Association Standards).

Specifications –––––––––––––––––––

• Current rating: 3A AC, DC (AWG#22)

• Voltage rating: 250V AC, DC

• Temperature range: -25˚C to +85˚C

(including temperature rise in applying

electrical current)

• Contact resistance: Initial value/10m Ω max.

After environmental testing/20m Ω max.

• Insulation resistance:

1,000M Ω min.

• Withstanding voltage: 1,000V AC/minute

• Applicable wire: AWG #30 to #22

• Applicable PC board thickness: 1.6mm(.063")

* Contact JST if Lead-Free product is required.

* Refer to "General Instruction and Notice when using

Terminals and Connectors" at the end of this catalog.

* Contact JST for details.

JST

Standards–––––––––––––––––––––––

0 ^{Recognized E60389}

Certified LR20812

J50014297

12 3 4 5 6 7...9

中文翻译

下载PDF

与XHP-20相关器件

型号	品牌	获取价格	描述	数据表
XHP-3	JST	获取价格	高壁结构，以防止用于覆盖PC板的树脂与嵌合针接触。专门设计用于PCB板。插头设计用于兼容X
XHP-4	JST	获取价格	高壁结构，以防止用于覆盖PC板的树脂与嵌合针接触。专门设计用于PCB板。插头设计用于兼容X
XHP-5	JST	获取价格	高壁结构，以防止用于覆盖PC板的树脂与嵌合针接触。专门设计用于PCB板。插头设计用于兼容X
XHP-6	JST	获取价格	高壁结构，以防止用于覆盖PC板的树脂与嵌合针接触。专门设计用于PCB板。插头设计用于兼容X
XHP-6(5.0)-U	JST	获取价格	该连接器是基于我们的NH系列连接器的高可靠性和多功能性而开发的。连接器非常小，封装高度为9
XHP-7	JST	获取价格	高壁结构，以防止用于覆盖PC板的树脂与嵌合针接触。专门设计用于PCB板。插头设计用于兼容X
XHP-8	JST	获取价格	高壁结构，以防止用于覆盖PC板的树脂与嵌合针接触。专门设计用于PCB板。插头设计用于兼容X
XHP-9	JST	获取价格	高壁结构，以防止用于覆盖PC板的树脂与嵌合针接触。专门设计用于PCB板。插头设计用于兼容X
XHP35	CREE	获取价格	Cree XLamp XHP35 LEDs
XHP35.2	CREE	获取价格	CreeÂ® XLampÂ® XHP35.2 LEDs

产品中心

服务支持

精选活动

关于我们

帮助中心

XHP-20

XHP-20 数据手册

与XHP-20相关器件

与XHP-20相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

XHP-20

XHP-20 数据手册

与XHP-20相关器件

与XHP-20相关文章

您还可以找

您在本页遇到什么问题？