Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1575-1
Shielded Power Inductors
–
XGL4030
Halogen
Free
• Industry’s lowest DCR and ultra low AC losses over a wide
frequency range
• AEC-Q200 Grade 1 (–40°C to +125°C)
• Superior current handling with soft saturation characteristics
• Wide inductance range up to 12 µH
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
AEC
+
Q200 125°C
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight: 0.27– 0.30 g
Operating voltage: 0 – 80 V
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 500/7″ reel; 2000/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Isat (A)5
120 drop ±20 drop 320 drop
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (ꢀµ)
SRF typ4
(Mµz)
Part number1
typ
max
XGL4030-450ME_
XGL4030-131ME_
XGL4030-271ME_
XGL4030-301ME_
XGL4030-401ME_
0.045
0.13
0.27
0.30
0.40
0.67
1.5
2.2
2.5
2.8
0.8
1.8
2.4
2.9
3.2
680
265
160
130
120
17.9
12.5
9.2
8.0
7.2
30.0
19.5
14.4
12.5
11.5
42.5
26.5
19.3
17.0
15.5
25.0
21.0
17.5
17.0
15.5
36.0
27.0
24.2
24.0
22.5
XGL4030-471ME_
XGL4030-621ME_
XGL4030-761ME_
XGL4030-102ME_
XGL4030-122ME_
0.47
0.62
0.76
1.0
3.4
4.1
4.9
6.5
8.5
3.9
4.6
5.5
7.2
9.4
100
82
72
65
55
6.8
6.1
5.6
4.8
4.2
10.6
9.5
8.7
7.6
6.8
14.2
12.7
11.8
10.3
9.2
15.3
12.5
12.3
10.8
9.5
21.2
15.0
14.2
13.0
12.2
1.2
XGL4030-152ME_
XGL4030-222ME_
XGL4030-332ME_
XGL4030-472ME_
XGL4030-562ME_
1.5
2.2
3.3
4.7
5.6
9.5
13.5
19.9
28.5
31.5
10.5
15.0
21.9
31.5
34.7
50
40
30
26
25
3.8
3.1
2.4
2.1
2.0
6.3
5.0
3.8
3.2
3.1
8.8
7.0
5.3
4.4
4.2
7.0
5.8
5.4
4.8
4.0
10.2
8.7
7.5
6.6
5.5
XGL4030-682ME_
XGL4030-822ME_
XGL4030-103ME_
XGL4030-123ME_
6.8
8.2
10.0
12.0
43.5
50.6
63.0
78.5
47.9
55.7
69.5
86.5
22
20
18.5
17.0
1.8
1.65
1.4
1.35
2.7
2.55
2.3
2.05
3.7
3.5
3.1
2.7
3.5
3.1
2.9
2.5
4.7
4.2
3.9
3.4
1. When ordering, please specify termination and packaging codes:
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
XGL4232-1±3MEC
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Termination: E = RoHS compliant tin-silver over copper.
Special order:T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape. Quantities less than full reel available: in tape
(not machine ready) or with leader and trailer ($25
charge).
Irms Testing
Irms testing was performed on 0.75 inch wide ×
0.25 inch thick copper traces in still air.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked.
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its
value without current.
Click for temperature derating information.
Temperature rise is highly dependent on many factors
including pcb land pattern, trace size, and proximity to
other components. Therefore temperature rise should
be verified in application conditions.
Specifications subject to change without notice.
Document 1575-1 Revised 12/19/22
US +1-847-639-6400 sales@coilcraft.com
Please check our website for latest information.
UK +44-1236-730595 sales@coilcraft-europe.com
© Coilcraft Inc. 2023
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg