Document 1703-1
Shielded Power Inductors
–
XGL3014
Halogen
Free
• Industry’s lowest DCR and ultra low AC losses
• AEC-Q200 Grade 1 (–40°C to +125°C)
• Superior current handling with soft saturation characteristics
• Wide inductance range from 0.082 to 1.8 µH
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
AEC
+
Q200 125°C
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight: 0.063 – 0.068 g
Operating voltage: 0 – 80 V
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 2000/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.55 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
20°C rise 40°C rise
Inductance2
20ꢀ (ꢁµ)
SRF typ4
(Mµz)
Isat (A)5
Part number1
typ
max
10ꢀ drop 20ꢀ drop 30ꢀ drop
XGL3014-820ME_
XGL3014-101ME_
XGL3014-201ME_
XGL3014-331ME_
XGL3014-471ME_
0.082
0.10
0.20
0.33
0.47
2.2
2.6
5.0
7.3
9.8
2.6
3.1
5.9
8.7
11.7
430
380
220
150
120
7.1
6.5
4.3
3.3
2.6
11.4
10.1
6.7
5.1
4.2
16.1
13.9
8.7
7.4
6.0
15.0
13.8
11.3
8.9
23.5
21.5
15.0
12.3
9.3
6.5
XGL3014-651ME_
XGL3014-801ME_
XGL3014-102ME_
XGL3014-142ME_
XGL3014-182ME_
0.65
0.80
1.0
1.4
1.8
13.7
16.1
19.0
30.6
38.1
16.4
19.3
22.7
36.7
45.7
110
90
75
60
55
2.2
2.1
1.9
1.6
1.3
3.5
3.3
3.0
2.4
2.1
5.0
4.5
4.1
3.3
3.0
6.2
5.8
5.3
4.2
4.1
8.3
7.9
7.1
5.6
5.6
1. When ordering, please specify termination and packaging codes:
XGL3014-182MEC
5. DC current at 25°C that causes the specified inductance drop from its
value without current.
Click for temperature derating information.
Termination: E = RoHS compliant tin-silver over copper.
Special order:T = RoHS tin-silver-copper
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings.
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Click for temperature derating information.
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2500 per full reel).
7. Electrical specifications at 25°C.
Quantities less than full reel available: in tape
(not machine ready) or with leader and trailer
($25 charge).
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
D = 13″ machine-ready reel. EIA-481 embossed plastic
Irms Testing
Irms testing was performed on 0.75 inch wide × 0.25 inch thick
copper traces in still air.
tape (7500 per full reel).
Factory order only, not stocked.
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
Temperature rise is highly dependent on many factors
including pcb land pattern, trace size, and proximity to other
components. Therefore temperature rise should be verified
in application conditions.
4. SRF measured using Agilent/HP 4395A or equivalent.
Specifications subject to change without notice.
Document 1703-1 Revised 08/04/22
US +1-847-639-6400 sales@coilcraft.com
Please check our website for latest information.
UK +44-1236-730595 sales@coilcraft-europe.com
© Coilcraft Inc. 2023
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg