Original Plugs
XG8
Original Plug that can be used in a wide
range of applications.
■ Can use as a Plug for different Sockets.
Applicable Sockets:
XG4M Flat Cable Connector
XG5 Discrete-wire IDC Connector
■ Through-holes handle 0.8-mm wires.
■ With Double-row Plugs with right-angle terminals,
block-base soldering improves productivity while
lock levers simplify locking (excluding XG8V and
XG8W Plugs with straight terminals).
■
Simply cut to divide (excluding XG8W Right-angle Plugs).
■ Standard models are approved by UL standards
(file No. E103202) (XG4A and XG8B only)
RoHS Compliant
■Connectors
For MIL Connectors
Model
XG8V
XG8W
Appearance
Single-row plugs with
straight terminals
Single-row plugs with
right-angle terminals
Double-row plugs with
straight terminals
Double-row plugs with
right-angle terminals
Page
2
3
Model
XG8A
XG8B
Appearance
Single-row plugs with
straight terminals
Single-row plugs with
right-angle terminals
Double-row plugs with
straight terminals
Double-row plugs with
right-angle terminals
Page
4
■Ratings and Characteristics
■Cross-sectional View of Terminal
Rated current
Rated voltage
Contact resistance
Insulation resistance
3 A (See note 1.)
300 VAC
20 mΩ max. (at 20 mV, 100 mA max.) (See note 2.)
1,000 MΩ min. (at 500 VDC)
0.75 dia.
Dielectric strength 650 VAC for 1 min (leakage current: 1 mA max.)
Ambient operating Operating: −55 to 105°C (with no icing)
temperature
■Applicable Sockets
XG8W and XG8B
(Double Row)
XG4M Flat Cable Connectors (Sockets)
Note: 1. The rated current will depend on the Socket you are us-
ing. It is 1 A using the XG4M for example.
XG4H Board-to-Board Connectors (Sockets)
2. The contact resistance is measured with the Plug mat-
XG5M-N Discrete-wire IDC Connectors
(Double-row Sockets)
ed to an XG5M-N.
■Materials and Finish
XG5N Discrete-wire IDC Sockets
Model
Base
XG8V and XG8W (See note.)
XG8A and XG8B
Fiber-glass reinforced PBT resin (UL94V-0)/black
Con- Mating
tacts end
Brass/nickel base, 0.15-µm Brass/nickel base, 0.15-
gold plating
µm gold plating
Brass/nickel base, 2.0-µm
tin plating
Terminal
Brass/nickel base, 2.0-
µm tin plating
Note: Two types of contacts and mating ends, one with gold
plating and the other with tin plating, are available.
1