Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1316-1
Shielded Power Inductors XEL3515
Halogen
Free
• AEC-200 Grade 1 (–40°C to +125°C)
• Extremely low DCR and ultra low AC losses for high switching
frequencies (2 to 5 MHz)
• Superior current handling with soft saturation characteristics
• Can withstand high current spike
AEC
Designer’s Kit C465 contains 3 each of all values of the XEL3515,
XEL3520 and XEL3530 series
+
Q200 125°C
Core material Composite
Environment RoHS compliant, halogen free
Terminations RoHS compliant, tin-silver over copper. Other
terminations available at additional cost.
Weight 77 – 82 mg
Operating voltage 0 – 80 V
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise).
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Isat (A)5
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (nꢀ)
SRF typ4
(Mꢀz)
Part number1
typ
max
120 drop ±20 drop 320 drop
XEL3515-720ME_
XEL3515-151ME_
XEL3515-221ME_
XEL3515-351ME_
XEL3515-561ME_
72
150
220
350
560
2.85
4.80
7.80
11.8
21.5
3.15
5.30
8.60
13.0
23.7
465
270
220
150
120
7.0
5.5
4.8
3.3
3.0
10.5
9.0
7.0
5.8
4.5
16.0
12.5
10.0
8.0
17.9
13.0
9.6
8.5
6.0
23.6
17.5
12.7
11.4
8.1
6.5
1. When ordering, please specify termination and packaging codes:
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
XEL3515-561MEC
Termination:E =RoHS compliant tin-silver over copper.
Special order:T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C =7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Quanti-
ties less than full reel available: in tape (not machine ready) or with leader and trailer ($25
charge).
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
B =Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminat-
ing the need for multiple packaging codes. When ordering, simply change the last letter of
your part number from B to C.
D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(3500 parts per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only
and does not represent absolute maximum ratings.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1316-1 Revised 09/14/21
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2021
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.