0
R
Spartan and Spartan-XL Families
Field Programmable Gate Arrays
0
0
DS060 (v1.6) September 19, 2001
Product Specification
•
System level features
Introduction
-
-
-
-
Available in both 5V and 3.3V versions
On-chip SelectRAM™ memory
Fully PCI compliant
Full readback capability for program verification
and internal node observability
™
The Spartan and the Spartan-XL families are a high-vol-
ume production FPGA solution that delivers all the key
requirements for ASIC replacement up to 40,000 gates.
These requirements include high performance, on-chip
RAM, core solutions and prices that, in high volume,
approach and in many cases are equivalent to mask pro-
grammed ASIC devices.
-
-
-
-
-
-
Dedicated high-speed carry logic
Internal 3-state bus capability
Eight global low-skew clock or signal networks
IEEE 1149.1-compatible Boundary Scan logic
Low cost plastic packages available in all densities
Footprint compatibility in common packages
The Spartan series is the result of more than 14 years of
FPGA design experience and feedback from thousands of
customers. By streamlining the Spartan series feature set,
leveraging advanced process technologies and focusing on
total cost management, the Spartan series delivers the key
features required by ASIC and other high-volume logic
users while avoiding the initial cost, long development
cycles and inherent risk of conventional ASICs. The Spar-
tan and Spartan-XL families in the Spartan series have ten
members, as shown in Table 1.
•
Fully supported by powerful Xilinx development system
-
-
-
Foundation Series: Integrated, shrink-wrap
software
Alliance Series: Dozens of PC and workstation
third party development systems supported
Fully automatic mapping, placement and routing
Additional Spartan-XL Features
Spartan and Spartan-XL Features
•
•
•
•
•
•
•
•
•
•
•
•
•
3.3V supply for low power with 5V tolerant I/Os
Power down input
Note: The Spartan series devices described in this data
sheet include the 5V Spartan family and the 3.3V
Spartan-XL family. See the separate data sheet for the 2.5V
Spartan-II family.
Higher performance
Faster carry logic
•
First ASIC replacement FPGA for high-volume
production with on-chip RAM
More flexible high-speed clock network
Latch capability in Configurable Logic Blocks
Input fast capture latch
•
•
•
•
Density up to 1862 logic cells or 40,000 system gates
Streamlined feature set based on XC4000 architecture
System performance beyond 80 MHz
Optional mux or 2-input function generator on outputs
12 mA or 24 mA output drive
5V and 3.3V PCI compliant
Broad set of AllianceCORE™ and LogiCORE™
predefined solutions available
Enhanced Boundary Scan
•
•
Unlimited reprogrammability
Low cost
Express Mode configuration
Chip scale packaging
Table 1: Spartan and Spartan-XL Field Programmable Gate Arrays
Max
System
Gates (Logic and RAM)
Typical
Gate Range
Max.
Avail. Distributed
CLBs Flip-flops User I/O RAM Bits
Total
Logic
Cells
238
CLB
Matrix
Total
No. of
(1)
Device
XCS05 and XCS05XL
XCS10 and XCS10XL
XCS20 and XCS20XL
5,000
10,000
20,000
30,000
40,000
2,000-5,000
3,000-10,000
7,000-20,000
10,000-30,000
13,000-40,000
10 x 10
14 x 14
20 x 20
24 x 24
28 x 28
100
196
400
576
784
360
616
77
3,200
6,272
466
112
160
192
224
950
1,120
1,536
2,016
12,800
18,432
25,088
XCS30 and XCS30XL 1368
XCS40 and XCS40XL 1862
Notes:
1. Max values of Typical Gate Range include 20-30% of CLBs used as RAM.
© 2001 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and disclaimers are as listed at http://www.xilinx.com/legal.htm.
All other trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice.
DS060 (v1.6) September 19, 2001
www.xilinx.com
1
Product Specification
1-800-255-7778