APPLICATION NOTE
This product has been discontinued. Please see www.xilinx.com/partinfo/notify/pdn0007.htm for details.
0
R
XCR5128C: 128 Macrocell
CPLD with Enhanced Clocking
0
14*
DS042 (v1.3) October 9, 2000
Product Specification
Features
Description
•
•
•
Industry's first TotalCMOS™ PLD - both CMOS design
and process technologies
Fast Zero Power (FZP™) design technique provides
ultra-low power and very high speed
5V, In-System Programmable (ISP) using a JTAG
interface
The XCR5128C CPLD (Complex Programmable Logic
Device) is a member of the CoolRunner® family of CPLDs
from Xilinx. These devices combine high speed and zero
power in a 128 macrocell CPLD. With the FZP design tech-
nique, the XCR5128C offers true pin-to-pin speeds of 7.5
ns, while simultaneously delivering power that is less than
100 µA at standby without the need for “turbo bits” or other
power down schemes. By replacing conventional sense
amplifier methods for implementing product terms (a tech-
nique that has been used in PLDs since the bipolar era)
with a cascaded chain of pure CMOS gates, the dynamic
power is also substantially lower than any competing
CPLD. These devices are the first TotalCMOS PLDs, as
they use both a CMOS process technology and the pat-
ented full CMOS FZP design technique.
-
-
On-chip supervoltage generation
ISP commands include: Enable, Erase, Program,
Verify
-
-
-
Supported by multiple ISP programming platforms
Four pin JTAG interface (TCK, TMS, TDI, TDO)
JTAG commands include: Bypass, Idcode
•
•
•
High speed pin-to-pin delays of 7.5 ns
Ultra-low static power of less than 100 µA
100% routable with 100% utilization while all pins and
all macrocells are fixed
The Xilinx FZP CPLDs utilize the patented XPLA
(eXtended Programmable Logic Array) architecture. The
XPLA architecture combines the best features of both PLA
and PAL type structures to deliver high speed and flexible
logic allocation that results in superior ability to make
design changes with fixed pinouts. The XPLA structure in
each logic block provides a fast 7.5 ns PAL path with five
dedicated product terms per output. This PAL path is joined
by an additional PLA structure that deploys a pool of 32
product terms to a fully programmable OR array that can
allocate the PLA product terms to any output in the logic
block. This combination allows logic to be allocated effi-
ciently throughout the logic block and supports as many as
37 product terms on an output. The speed with which logic
is allocated from the PLA array to an output is only 2ns,
regardless of the number of PLA product terms used, which
results in worst case tPD's of only 9.5 ns from any pin to any
other pin. In addition, logic that is common to multiple out-
puts can be placed on a single PLA product term and
shared across multiple outputs via the OR array, effectively
increasing design density.
•
Deterministic timing model that is extremely simple to
use
Up to 20 clocks available
Support for complex asynchronous clocking
Innovative XPLA™ architecture combines high speed
with extreme flexibility
1000 erase/program cycles guaranteed
20 years data retention guaranteed
Logic expandable to 37 product terms
PCI compliant
Advanced 0.5µ E2CMOS process
Security bit prevents unauthorized access
Design entry and verification using industry standard
and Xilinx CAE tools
Reprogrammable using industry standard device
programmers
Innovative Control Term structure provides either sum
terms or product terms in each logic block for:
•
•
•
•
•
•
•
•
•
•
•
•
-
-
-
Programmable 3-state buffer
Asynchronous macrocell register preset/reset
Up to two asynchronous clocks
The XCR5128C CPLDs are supported by industry standard
CAE tools (Cadence/OrCAD, Exemplar Logic, Mentor,
Synopsys, Synario, Viewlogic, and Synplicity), using text
(ABEL, VHDL, Verilog) and/or schematic entry. Design ver-
ification uses industry standard simulators for functional
and timing simulation. Development is supported on per-
sonal computer, Sparc, and HP platforms. Device fitting
uses Xilinx developed tools including WebFITTER.
•
Programmable global 3-state pin facilitates `bed of
nails' testing without using logic resources
Available in TQFP and LQFP packages
•
•
Available in both Commercial and Industrial grades
The XCR5128C CPLD is electrically reprogrammable
using industry standard device programmers from vendors
DS042 (v1.3) October 9, 2000
www.xilinx.com
1
1-800-255-7778
5秒后页面跳转
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
AMD宣布全球裁员约1000人，调整战略聚焦增长
英伟达新AI芯片Rubin或提前半年亮相
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
