XC6130/XC6131 Series
Watchdog Timeout Period Externally Adjustable Voltage Detector
ETR02026-007
■ GENERAL DESCRIPTION
The XC6130/XC6131 series are voltage detectors with a watchdog function. The watchdog timeout time and release delay time
can be set as desired using a single external capacitor. These voltage detectors are used for microprocessor monitoring, and
when the power voltage reaches the detect voltage or an L→H pulse is not input to the watchdog pin within the watchdog timeout
time, an L level signal is output from the RESETB pin.
The XC6130 series has a manual reset function. When the manual reset pin is set to Low level at any desired timing, an L level
signal is output from the RESETB pin.
The XC6131 series has a watchdog ON/OFF function. By setting the EN pin to L level, the watchdog function can be turned
OFF while the voltage detector that monitors the power voltage continues to operate.
The MRB pin and EN pin are pulled up internally to VIN, and thus these pins can be left open when not used.
■FEATURES
■APPLICATIONS
Operating Ambient Temperature : -40℃ ~ 125℃
●Microprocessor reset and malfunction monitoring circuitry
●Memory battery backup circuits
●Power-on reset circuits
Operating Voltage Range
Detect Voltage Range
: 1.5V ~ 6.0V
: 1.6V ~ 5.0V ±1.0% (SOT-26)
1.6V ~ 5.0V±1.5% (DFN1515-6A)
: VDFL×5%
●Power failure detection
Hysteresis Width
Temperature Characteristics
Output Configuration
Low Power Consumption
: ±50ppm/℃
: N-channel open drain output
: 8.1μA : Detect
9.8μA : Release
2.5μA : Release (EN=L)
: Manual Reset (XC6130)
: Watchdog function OFF (XC6131)
: 100ms (Cd=0.1μF)
Function
WD Timeout Time
Release Delay Time
: 100ms (Cd=0.1μF) (at power on)
10ms (Cd=0.1μF)
(After Watchdog Timeout)
: SOT-26
Package
DFN1515-6A
Environmentally Friendly
: EU RoHS compliant, Pb free
■TYPICAL APPLICATION CIRCUIT
■TYPICAL PERFORMANCE
CHARACTERISTICS
XC6130 Series
VIN
VIN
Rpull
RESETB
INPUT
RESETB
WD
MRB
Cd
I/O
VSS
RESET
SW
XC6131 Series
VIN
VIN
Rpull
RESETB
INPUT
RESETB
WD
EN/ENB
Cd
I/O
VSS
1/29