Document 991-1
Shielded Power Inductors
–
XAL5020
• High current and very low DCR
• Soft saturation makes them ideal for VRM/VRD applications.
• AEC-200 Grade 1 qualified (–40°C to +125°C ambient)
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Weight 0.28 – 0.29 g
Ambient temperature –40°C to +125°C with Irms current, +125°C to
+165°C with derated current.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.2 mm thick, 8 mm pocket spacing, 2.16 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (ꢀµ)
SRF typ4
(Mµz)
Isat5
(A)
Part number1
typ
max
Irms Testing
XAL5020-161ME_
XAL5020-331ME_
XAL5020-561ME_
XAL5020-801ME_
XAL5020-122ME_
XAL5020-222ME_
0.16
0.33
0.56
0.80
1.2
4.11
6.40
8.30
10.3
17.8
34.6
5.00
7.68
9.54
11.8
20.5
39.8
205
110
80
64
50
24.2
17.1
14.1
12.0
9.5
13.9
10.5
9.9
9.4
6.8
18.8
14.4
13.9
13.0
9.4
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other com-
ponents. Therefore temperature
rise should be verified in appli-
cation conditions.
2.2
37
7.0
4.7
6.5
1. When ordering, please specify packaging code:
XAL52±2-±±±MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (3500 parts per
full reel).
Irms Derating
120
110
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops 30% from its value without
current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
100
90
80
70
60
50
40
30
20
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
10
0
-40 -20
0
20
40
60
80 100 120 140 160 180
Ambient temperature (°C)
These parts are preproduction products for electrical evaluation only.
Document 991-1 Revised 11/09/12
US +1-847-639-6400 sales@coilcraft.com
Specification subject to change without notice.
UK +44-1236-730595 sales@coilcraft-europe.com
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg