Document 806-1
Shielded Power Inductors
–
XAL40xx
•ꢀHighꢀcurrentꢀandꢀveryꢀlowꢀDCR
•ꢀAEC-200ꢀGradeꢀ1ꢀqualifiedꢀ(–40°Cꢀtoꢀ+125°Cꢀambient)
•ꢀ SoftꢀsaturationꢀmakesꢀthemꢀidealꢀforꢀVRM/VRDꢀapplications.
Designer’s Kit C4±9 contains 5 of each value
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +165°C with derated current.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Only pure water or alcohol recommended
DCR (mOhms)3
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (µH)
SRF typ4
(MHz)
Isat5
(A)
Part number1
typ
max
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
XAL4020-221ME_
XAL4020-401ME_
XAL4020-601ME_
XAL4020-102ME_
XAL4020-152ME_
XAL4020-222ME_
0.22
0.40
0.60
1.0
1.5
2.2
5.81
7.55
9.50
13.25
21.45
35.20
6.40
191
145
106
79
64
52
18.7
12.5
10.4
8.7
7.1
5.6
12.0
10.0
7.9
6.7
5.2
16.8
14.0
11.7
9.6
7.5
5.5
8.30
10.45
14.60
23.60
38.70
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
4.0
XAL4030-332ME_
XAL4030-472ME_
XAL4030-682ME_
3.3
4.7
6.8
26.0
40.1
67.4
28.6
44.1
74.1
43
36
29
5.5
4.5
3.6
5.0
3.9
3.0
6.6
5.1
3.9
XAL4040-822ME_
XAL4040-103ME_
XAL4040-153ME_
8.2
10
15
60.8
84.0
109
66.9
92.4
120
27
24
20
4.0
3.0
2.8
2.4
2.2
2.0
3.4
3.1
2.8
1. When ordering, please specify termination and packaging coded:
XAL42±2-±±±MEC
Termination: E = RoHS compliant tin-silver over copper.
Special order:T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape.
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops 30% (typ) from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
Document 806-1 Revised 07/18/12
US +1-847-639-6400 sales@coilcraft.com
Please check our website for latest information.
UK +44-1236-730595 sales@coilcraft-europe.com
© Coilcraft Inc. 2012
This product may not be used in medical of high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg