Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 947-1
Shielded Power Inductors XAL1510
Halogen
Free
• High current; very low DCR
• AEC-Q200 Grade 1 (–40°C to +125°C)
• Soft saturation makes them ideal for VRM/VRD applications.
Core material Composite
Core and winding loss Go to online calculator
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
AEC
+
Q200 125°C
Weight 12.4 – 15.0 g
Operating voltage: 0 – 60 V
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 150/13″ reel Plastic tape: 32 mm wide, 0.4 mm thick,
24 mm pocket spacing, 10.26 mm pocket depth (all except -333)
11.26 mm pocket depth (-333 only).
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
±0°C rise 40°C rise
Inductance2
±±0ꢀ (µH)
SRF typ4
(MHz)
Isat5
(A)
Part number1
typ
max
XAL1510-472ME_
XAL1510-682ME_
XAL1510-822ME_
XAL1510-103ME_
XAL1510-153ME_
4.7
6.8
8.2
10
3.35
4.17
6.00
6.80
9.17
3.80
4.60
7.50
9.00
12.4
12.7
11.5
10.8
10.1
8.0
39.0
36.0
30.0
26.3
23.0
21
19
18
16
13
29
26
24
22
18
15
XAL1510-223ME_
XAL1510-333ME_
22
33
14.5
18.7
16.0
20.0
6.3
5.8
18.7
16.7
10.5
8.6
14
12
1. When ordering, please specify termination and packaging codes:
XAL1510-333MED
Irms Testing
Irms testing was performed on 0.75 inch wide × 0.25 inch thick
copper traces in still air.
Termination:
E = RoHS compliant tin-silver over copper.
Special order: S = non-RoHS tin-lead (63/37).
Packaging:
D = 13″ machine-ready reel. EIA-481 embossed plas-
tic tape (150 parts per full reel). Quantities less than
full reel available: in tape (not machine ready) or with
leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part
numbering system, Coilcraft is eliminating the need
for multiple packaging codes. When ordering, simply
change the last letter of your part number from B to D.
Temperature rise is highly dependent on many factors including
pcb land pattern, trace size, and proximity to other components.
Therefore temperature rise should be verified in application
conditions.
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from
its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 947-1 Revised 11/14/22
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2022
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.