Datasheet > X9511WSIZT2

X9511WSIZT2

更新时间： 2024-02-08 08:22:14

品牌	Logo	应用领域
瑞萨 - RENESAS		光电二极管转换器电阻器
页数	文件大小	规格书
9页	189K
描述
10K DIGITAL POTENTIOMETER, PUSH-BUTTON CONTROL INTERFACE, 32 POSITIONS, PDSO8, ROHS COMPLIANT, PLASTIC, SOIC-8

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

X9511WSIZT2 技术参数

是否Rohs认证：	符合	生命周期：	Obsolete
零件包装代码：	SOIC	包装说明：	SOP, SOP8,.25
针数：	8	Reach Compliance Code：	compliant
ECCN代码：	EAR99	HTS代码：	8542.39.00.01
风险等级：	5.26	Is Samacsys：	N
其他特性：	NONVOLATILE MEMORY	控制接口：	PUSH-BUTTON
转换器类型：	DIGITAL POTENTIOMETER	JESD-30 代码：	R-PDSO-G8
JESD-609代码：	e3	长度：	4.89 mm
湿度敏感等级：	1	功能数量：	1
位置数：	32	端子数量：	8
最高工作温度：	85 °C	最低工作温度：	-40 °C
封装主体材料：	PLASTIC/EPOXY	封装代码：	SOP
封装等效代码：	SOP8,.25	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE	峰值回流温度（摄氏度）：	260
电源：	5 V	认证状态：	Not Qualified
电阻定律：	LINEAR	最大电阻容差：	20%
最大电阻器端电压：	5 V	最小电阻器端电压：	-5 V
座面最大高度：	1.68 mm	子类别：	Digital Potentiometers
标称供电电压：	5 V	表面贴装：	YES
技术：	CMOS	标称温度系数：	300 ppm/ °C
温度等级：	INDUSTRIAL	端子面层：	Matte Tin (Sn) - annealed
端子形式：	GULL WING	端子节距：	1.27 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	40
标称总电阻：	10000 Ω	宽度：	3.9 mm
Base Number Matches：	1

X9511WSIZT2 数据手册

X9511

Single Push Button Controlled Potentiometer (XDCP™)

Data Sheet

February 2, 2007

FN8205.3

DESCRIPTION

Linear, 32 Taps, Push Button Controlled,

Terminal Voltage ±5V

The Intersil X9511 is a push button controlled potenti-

ometer that is ideal for push button controlled resis-

tance trimming.

FEATURES

• Push button controlled

• Low power CMOS

The X9511 is a resistor array composed of 31 resistive

elements. Between each element and at either end

are tap points accessible to the wiper element. The

position of the wiper element is controlled by the PU

and PD inputs. The position of the wiper can be auto-

—Active current, 3mA max

—Standby current, 100µA typical

• 31 resistive elements

—Temperature compensated

—±20% end to end resistance range

—-5V to +5V range

matically stored in E memory and then be recalled

upon a subsequent power-on operation.

• 32 wiper tap points

The resolution of the X9511 is equal to the maximum

resistance value divided by 31. As an example, for the

X9511W (10kΩ) each tap point represents 323Ω.

—Wiper positioned via two push button inputs

—Slow and fast scan modes

—AUTOSTORE option

All Intersil nonvolatile products are designed and

tested for applications requiring extended endurance

and data retention.

—Manual store option

—Wiper position stored in nonvolatile memory

and recalled on power-up

• 100 year wiper position data retention

• X9511W = 10kΩ

• Packages

—8 Ld PDIP

—8 Ld SOIC

• Pb-free plus anneal available (RoHS compliant)

ORDERING INFORMATION

TEMPERATURE

TOTAL

PART NUMBER

X9511WP

PART MARKING

X9511WP

(kΩ)

RANGE (°C)

PACKAGE

8 Ld PDIP

8 Ld PDIP*** (Pb-free) MDP0031

8 Ld PDIP MDP0031

8 Ld PDIP*** (Pb-free) MDP0031

PKG. DWG. #

0 to +70

MDP0031

X9511WPZ (Note)

X9511WPI

X9511WP Z

X9511WP I

X9511WP Z I

X9511W

0 to +70

-40 to +85

0 to +70

X9511WPIZ (Note)

X9511WS**

8 Ld SOIC

MDP0027

X9511WSZ* **(Note)

X9511W Z

X9511W I

0 to +70

8 Ld SOIC (Pb-free)

8 Ld SOIC

X9511WSI* **

-40 to +85

X9511WSIZ* ** (Note)

X9511W Z I

8 Ld SOIC (Pb-free)

NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials

and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering

operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free

requirements of IPC/JEDEC J STD-020.

*Add "T1" suffix for tape and reel.

**Add "T2" suffix for tape and reel.

***Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder

processing applications.

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.

All other trademarks mentioned are the property of their respective owners.

12 3 4 5 6 7...9

下载PDF

与X9511WSIZT2相关器件

型号	品牌	描述	获取价格	数据表
X9511WSM	XICOR	PushPot O Potentiometer (Push Button Controlled)	获取价格
X9511WST1	RENESAS	10K DIGITAL POTENTIOMETER, PUSH-BUTTON CONTROL INTERFACE, 32 POSITIONS, PDSO8, PLASTIC, SO	获取价格
X9511WSZ	INTERSIL	Single Digitally-Controlled (XDCP) Potentiometer (Push Button Controlled)	获取价格
X9511WSZT2	RENESAS	10K DIGITAL POTENTIOMETER, PUSH-BUTTON CONTROL INTERFACE, 32 POSITIONS, PDSO8, ROHS COMPLI	获取价格
X9511Z	XICOR	PushPot O Potentiometer (Push Button Controlled)	获取价格
X9511ZP	XICOR	PushPot O Potentiometer (Push Button Controlled)	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

X9511WSIZT2

X9511WSIZT2 技术参数

X9511WSIZT2 数据手册

与X9511WSIZT2相关器件

与X9511WSIZT2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

X9511WSIZT2

X9511WSIZT2 技术参数

X9511WSIZT2 数据手册

与X9511WSIZT2相关器件

与X9511WSIZT2相关文章

您还可以找

您在本页遇到什么问题？