X60008C-50, X60008D-50
®
Data Sheet
June 2, 2006
FN8143.1
DESCRIPTION
Precision 5.0V FGA™ Voltage Reference
The X60008-50 FGA™ voltage references are very
high precision analog voltage references fabricated in
Intersil’s proprietary Floating Gate Analog technology,
which achieves superior levels of performance when
compared to conventional band gap, buried zener, or
FEATURES
• Output Voltage: 5.000V
• Absolute Initial Accuracy Options:
±0.5mV & ±1.0mV
X
™ technologies.
FET
• Ultra Low Power Supply Current: 500nA
FGA™ voltage references feature very high initial
accuracy, very low temperature coefficient, excellent
long term stability, low noise and excellent line and
load regulation, at the lowest power consumption
currently available. These voltage references enable
advanced applications for precision industrial &
portable systems operating at significantly higher
accuracy and lower power levels than can be achieved
with conventional technologies.
• Low Temperature Coefficient options:
5 & 10ppm/°C
• 10 mA Source & Sink Current Capability
• 10 ppm/1000hrs Long Term Stability
• Very Low Dropout Voltage: 100mV @ no load
• Supply Voltage Range: 5.1V to 9.0V
• 5kV ESD (Human Body Model)
• Standard Package: 8 Ld SOIC
• Temp Range: -40°C to +85°C
• Pb-Free Plus Anneal Available (RoHS Compliant)
APPLICATIONS
• High Resolution A/Ds & D/As
• Digital Meters
• Precision Current Sources
• Precision Regulators
• Smart sensors
• Strain Gage Bridges
• Threshold Detectors
• Servo Systems
• Calibration Systems
• V-F Converters
• Precision Oscillators
• Battery Management Systems
TYPICAL APPLICATION
VIN = +6.5V
0.1µF
10µF
VIN
VOUT
0.001µF(*)
X60008-50
GND
REF IN
Enable
SCK
SDAT
Serial
Bus
16 to 24-bit
A/D Converter
(*)Also see Figure 3 in Applications Information
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005, 2006. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.