WMSAW24 SERIES
15~24 Watts AC/DC Wall Mount Power
Supplies
Rev F
United States (“U” Suffix)
United Kingdom (“K” Suffix)
Europe (“E” Suffix)
FEATURES
• Class II
• Single Outputs
• RoHS Compliant
• 100-240VAC Input Voltage Range
• 15~24 Watts Output Power
• Very Low Standby Power
Size: 2.90 x 1.38 x 2.04
inches
Size: 2.95 x 1.97 x 2.31
inches
Size: 2.90 x 1.38 x 2.04
inches
• MTBF: 50,000 Hours
• 0°C to +40° Operating Temperature Range
• Over Voltage, Over Current, and Short Circuit
Protection
China (“C” Suffix)
Australia (“A” Suffix)
Japan (“J” Suffix)
Korea (“KR” Suffix)
• CEC / Energy Star Level V Compliant
• UL/cUL, FCC, CE, AV/CE, GS, AV/GS, CB, AV/CB,
EUP, SAA BS1363, CCC, MEPS, PSE, KC and C-
TICK Safety Approvals
• United States, United Kingdom, Europe, China,
Australia and Japan AC Plug Types Available
• Several Output Connector Options Available
Size: 2.90 x 1.38 x Size: 2.91 x 1.38 x 2.74 Size: 2.90 x 1.38 x Size: 2.90 x 1.38 x
2.04 inches
inches
2.04 inches
2.04 inches
DESCRIPTION
The WMSAW24 series of Class II AC/DC wall mount power supplies provides up to 24 Watts of output power. This series has single
output models with an input voltage range of 100-240VAC. These supplies are protected against over voltage, over current, and short
circuit conditions. The WMSAW24 series is RoHS and CEC/Energy Star Level V compliant and has UL/cUL, FCC, CE, AV/CE, GS,
AV/GS, CB, AV/CB, EUP, SAA BS1363, CCC, MEPS, PSE, KC and C-TICK safety approvals. United States, United Kingdom, Europe,
China, Australia, Korea and Japan AC plug types are available. Several output connector options are also available. Please contact the
factory for ordering details.
MODEL SELECTION TABLE
Model Number (1) Input Voltage Range
Output Voltage
Output Current
Ripple & Noise (2)
Output Power
WMSAW1505-x
WMSAW1809-x
WMSAW2209-x
WMSAW1812-x
WMSAW2412-x
WMSAW2319-x
WMSAW2424-x
NOTES
5 VDC
9 VDC
9 VDC
12 VDC
12 VDC
19 VDC
24 VDC
3A
2A
2.5A
1.5A
2A
50mVp-p
90mVp-p
90mVp-p
120mVp-p
120mVp-p
190mVp-p
240mVp-p
15W
18W
22.5W
18W
24W
23.75W
24W
100 ~ 240 VAC
1.25A
1A
1. The “x” in the model number represents the type of plug: “U” for United States type, “K” for United Kingdom type, “E” for
Europe type, “A” for Australia type, “C” for China type, and “J” for Japan type.
2. Ripple and noise is measured at 20MHz limited bandwidth with 0.1µF ceramic and 10µF electrolytic capacitors across the
output
3. Optional output connectors available. Please call factory for ordering details.
4. This product is Listed to applicable standards and requirements by UL.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
website: www.wallindustries.com • e-mail: sales@wallindustries.com
8/1/2019
Page 1 of 4