Two-circuit Limit Switch
WL-N
Select the Best Two-circuit Switch for
the Operating Environment and
Application.
• Standard-feature crossbar contacts provide high
contact reliability.
Applicable to either standard loads or microloads.
• Standard features include 90° overtravel, one-
side operation, and four-direction mounting.
• IP67 degree of protection.
• Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for
information on approved models.
Be sure to read Safety Precautions on page 24 to 26 and
Safety Precautions for All Limit Switches.
Features
Easy to Select
• The contacts can be used with either standard loads or microloads.
• Standard features include 90° overtravel, one-side operation, and
four-direction mounting.
Easy to See (Models with Operation Indicators)
• An indicator with a wide field of view has been used.
Easy to Work With
• Downsizing of the built-in switch has increased the space to house
the wiring.
• Steel screws that are attracted by magnetic screwdrivers have
been used for the terminal screws inside the Switches.
• Resin and elastomer resistance has replaced the insulating paper.
Internal Structure
WL
WL-N *1
A 3D structure
disperses light !
Whether the indicator is lit can be clearly seen from the side.
More space!
*1. The wiring method is different for models with indicators.
Refer to Wring on page 25 under Safety Precautions.
Easy tightening
with magnetized
screwdrivers!
1