WIT2450DK
Benefits:
• Simple to set-up and configure
OEM Module
Developer’s
Kits
• Complete with all components to put a system “on the air”
• Enclosed units contain rechargeable battery supply
• Accelerates the integration process
• Full technical support included with purchase
• Allows development of interface to your system
• Allows development of your control software
Each WIT OEM Module Developer’s Kits contain two selfcontained wireless modems built around specific
OEM modules. Additionally, two OEM modules are included in the kit. The self-contained units allow
developers to get up and running quickly using standard RS-232 interfaces without having to build a 3.3V
level serial interface. The self-contained modems include LEDs to provide modem status information visually,
and a built-in rechargeable battery pack allows the developer to use the modems without being tethered to a
power source. This provides a simple way to test the range of the radios. Other than the true RS-232 signals
of the serial interface, the self-contained modems operate exactly as the OEM modules.
Developer’s Kits Contents:
• 2 ea. Enclosed Desktop Modem
• 2 ea. OEM Module
• 2 ea. 4” RF Cable
• 4 ea. Right Angle Rubber Flex
Antenna
• 2 ea. Power / Data Cable
• 2 ea. Wall Mount Power Supply/
Charger
• Configuration Software
• Integration Guide
Connection is made to the modem through a standard DB-9 connector. The modems are set up as a DCE
device requiring the use of a straight-through cable to connect to DTE devices. The modems can be used
with a three-wire connection; transmit data, receive data, and ground are the three required connections.
Note that in this configuration, no flow control is available as the OEM Modules do not support software flow
control.
When the developer’s kit is shipped from the factory, one modem is set up as a base station and the other is
set up as a remote. However, with the supplied configuration software, this configuration can be modified to
suit your particular application. Refer to the bottom of this sheet for individual kits.
OEM Module Developer’s Kits: Ordering Information
OEM Module
Developer’s Kit Part No.
Description
WIT910
WIT910DK
WIT910 Developers Kit
WIT2410 Developer’s Kit
WIT2410
WIT2410DK
WIT2410SDK
WIT2410 SNAP Developer’s Kit:
Includes the SNAP2410 Access Point
WIT2411
WIT5811
WIT2450
WIT2411DK
WIT5811DK
WIT2450DK
WIT2411 Developer’s Kit
WIT5811 Developer’s Kit
WIT2450 Developer’s Kit
www.RFM.com
E-mail: info@rfm.com
Page 1 of 1
©2008 by RF Monolithics, Inc.
WIT910DK - 3/19/08