APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
RATING
STORAGE
TEMPERATURE RANGE
-40℃ to 105℃(Note1)
-40℃ to 105℃
CURRENT
VOLTAGE
50 V DC
1
A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Visually and by measuring instrument.
Confirmed visually.
×
×
×
×
According to drawing.
Marking
ELECTRIC CHARACTERISTICS
Contact Resistance
Contact Resistance
Millivolt Level Method
Insulation Resistance
1A DC.
50mΩ max.
-
-
-
-
20 mV AC max, 0.1 mA (DC or 1000Hz).
Ω
50m max.
100M min.
Ω
500 V DC.
-
-
Voltage Proof
Continuity
500 V AC for 1 min.
100 mA DC
No flashover or breakdown.
Continuity
×
-
×
×
MECHANICAL CHARACTERISTICS
Mechanical Oparation
30 times insertions and extractions.
① Contact resistance 100mΩ max
-
×
-
-
② No damage, crack and looseness of parts.
Vibration
Frequency 20 to 200 Hz,
43.1 m/s2 at 3 h for 3 directions.
① No electrical discontinuity of 10s.
② Contact resistance: 100mΩ max.
③ No damage, crack and looseness of parts.
-
-
-
-
-
-
Shock
Frequency 20 to 50 Hz,
66.6 m/s2 at 1 h.
① No electrical discontinuity of 10s.
② Contact resistance: 100mΩ max.
③ No damage, crack and looseness of parts.
-
-
-
-
-
-
Lock Strength
Applying a pull force the mating axially at 100N
max.
① During applying, mating completely.
-
-
-
-
② After applying, no defect of mating parts.
ENVIRONMENTAL CHARACTERISTICS
Damp Heat
(Steady State)
Exposed at 60℃, 90 ~ 95 %, 500h.
① Contact resistance: 100mΩ max.
② Insulation resistance:100MΩ min.
③ No damage, crack and looseness of parts.
-
-
-
-
-
-
Rapid Change Of
Temperature
Temperature -40 → 5 to 35 → 105→ 5 to 35℃ ① Contact resistance: 100mΩ max.
-
-
-
-
-
-
Time
30 →
5
→ 30 → 5 min
② Insulation resistance:100MΩ min.
under 1000 cycles.
③ No damage, crack and looseness of parts.
① Contact resistance: 100mΩ max.
Dry Heat
℃
Exposed at 105 , 300h.
-
-
-
-
② No damage, crack and looseness of parts.
① Contact resistance: 100mΩ max.
Cold
℃
Exposed at -40 , 120h.
-
-
-
-
② No damage, crack and looseness of parts.
① Contact resistance: 100mΩ max.
Resistance To So2 Gas
Exposed in 25 ppm for 96h.
-
-
-
-
② No damage, crack and looseness of parts.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
(Note1)
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
KI.HIROKAWA
MH.YAMAGUCHI
HR.IWAI
20211223
20211223
20211223
20211223
Include the temperature rising by current.
HR.IWAI
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-395704-00-00
WGT43GT43-1191
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL0781-1191-0-00