Emergency Voice Evacuation
Features
• Integrated voice in IF610 cabinet.
VSYS Options for IF610 Analog
Addressable Control Panel
• 25, 50, 100, or 200-watt sys-
tems.
• 25-volt or 70-volt operation.
• Fully supervised amplifier.
• Multiple EVAC tones.
Description
The 610VE panel’s VSYS option adds
emergency voice evacuation capabilities
to the IdentiFlex 610 (IF610) analog ad-
dressable Fire Alarm Control Panel
(FACP).
• Four-minute message capacity.
• Digital prerecorded voice evacua-
tion messages.
The VSYS options are integrated in the
same housing as the IF610, delivering
dependable performance in an attractive
cabinet design.
• Paging microphone with override.
• All-call function.
VSYS systems provide prerecorded digi-
tal alert messages, all-call, and indi-
vidual control-by-circuit (microphone).
• Single or multiple speaker
circuits (up to eight Class A or
eight Class B maximum).
The emergency voice evacuation capa-
bility of the IF610 is used to provide pre-
recorded natural-voice messages (VEX)
and emergency paging to facilitate or-
derly evacuation of protected areas.
Voice evacuation systems are frequently
required by the Authority Having Jurisdic-
tion (AHJ) for areas of assembly such as
Listings
Listings and approvals below
apply to the basic VSYS/VEX
components. In some cases,
certain modules may not be
listed by certain approval agen-
cies, or listing may be in pro-
cess. Consult factory for latest
listing status.
auditoriums, gymnasiums, places of worship, and large meeting rooms. IF610/VSYS
systems are suited to meet these needs and the requirements of NFPA 101 for New
and Existing Assembly Occupancies.
Systems are available in 25, 50, 100, and 200-watt configurations. The IF610 with
VSYS option can be configured for one to eight speaker circuits at up to 25 watts per
circuit. Each amplifier offers an independent power supply and battery charger with
a digital message repeater (VEX).
• UL Listed: file S521.
System Operation
The VSYS option is a flexible voice solution that can be sized to meet the job require-
ments by selecting the style and number of speaker circuits and the size of the am-
plifier. The system is also available with prerecorded digital message, and includes
emergency paging capability.
• CSFM approved: files 7165-
1288:154, 7170-1288:153.
• MEAapproved: file 149-99-E Vol.
II.
The VSYS includes a three-minute message restart, which occurs automatically after
a three-minute depression of the microphone key when the digital messaging op-
tion is used.
The VSYS Emergency Voice Evacuation System may also be ordered with multiple
speaker-circuit configurations. Circuit-splitter modules allow the amplifier power to
be divided among multiple zones for efficient use and controlled zone signaling.
Splitter modules are equipped with circuit-select switches that allow for manual
selection of voice evacuation zones for emergency paging. An LED is provided for
annunciation of each zone’s status.
Enclosures can house up to 200 watts of amplification, a paging microphone, digital
voice messaging, and one or two circuit-splitter modules for up to eight Class B (Style
Y) or up to four Class A (Style Z) circuits. Circuits are rated at 25 watts each. VSYS
provides an integral battery charger for its dedicated batteries. Supervised remote
microphones are supported by the system. Speaker circuits are controlled by indi-
vidual toggle switches. A circuit identification label is provided for field-customized
circuit labeling.
VSYS for IF610 CS-2002 09/01/06
Page 1 of 2
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
