VSMP Series (ꢀ8ꢀꢁ, 12ꢀ6, 1ꢁꢀ6, 2ꢀ1ꢀ, 2ꢁ12) (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Foil Wraparound Surface Mount Chip Resistor
with TCR of ꢀ0ꢀꢁ ppꢂm/C and Power Coefficient of ꢁ ppꢂ at
Rated Power and Load Life Stability of ꢀ0ꢀꢀꢁ ꢃ (ꢁꢀ ppꢂ)
FEATURES
•
Temperature coefficient of resistance (TCR):
0.05 ppm/°C typical (0 °C to + 60 °C)
0.2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C ref.)
Tolerance: to 0.01 %
Power coefficient “ΔR due to self heating”:
5 ppm at rated power
Pb-free
Available
•
•
RoHS*
COMPLIANT
•
•
•
Power rating: to 750 mW at + 70 °C
Load life stability: to 0.005 % at 70 °C, 2000 h at rated power
Top View
Resistance range: 10
please contact us)
Ω to 150 kΩ (for higher and lower values,
Any value at any tolerance within resistance range
•
•
•
•
•
•
•
•
•
•
Fast thermal stabilization < 1 s
Electrostatic discharge (ESD) above 2ꢁ ꢀꢀꢀ V
Short time overload: 0.005 %
INTRODUCTION
≤
VSMP Series is the industry’s first device to provide High
Rated power, Excellent load life stability along with extremely
low TCR all in one resistor.
Non inductive, non capacitive design
Rise time: 1 ns without ringing
Current noise: - 42 dB
Voltage coefficient < 0.1 ppm/V
Non inductive: < 0.08 µH
One of the most important parameters influencing stability is
the Temperature Coefficient of Resistance (TCR). Although
the TCR of foil resistors is considered extremely low, this
characteristic has been further refined over the years. The
VSMP Series utilizes ultra high precision Bulk Metal® Z-Foil.
The Z-Foil technology provides a significant reduction of the
resistive element's sensitivity to ambient temperature
variations (TCR) and to self heating when power is applied
(power coefficient). Along with the inherently low PCR and
TCR, Z-Foil technology also provides remarkably improved
load life stability, low noise and availability of tight tolerance.
Non hot spot design
Terminal finishes available:
lead (Pb)-free
tin/lead alloy
•
•
•
•
Matched sets are available on request
Any value available within resistance range (e.g. 1K2345)
Screening per EEE-INST-002 is available for military and space
Prototype samples available from 48 h. For more information,
please contact foil@vishay.com
•
For better performances please contact us
APPLICATIONS
The VSMP has a full wraparound termination which ensures
safe handling during the manufacturing process, as well as
providing stability during multiple thermal cyclings.
•
•
•
•
•
Automatic test equipment (ATE)
High precision instrumentation
Laboratory, industrial and medical
Audio
EB applications (electron beam scanning and recording
equipment, electron microscopes)
Military and space
Satellite
Commercial aviation
Airborne
Down hole instrumentation
Communication
Our Application Engineering Department is available to
advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us using the e-mail address in the footer below.
•
•
•
•
•
•
TABLE 1 - TOLERANCE AND TCR VS.
RESISTANCE VALUE1)
(- 55 °C to + 125 °C, + 25 °C Ref.)
FIGURE 1 - POWER DERATING CURVE
RESISTANCE
VALUE
TYPICAL TCR AND
MAX0 SPREAD
(ppꢂm/C)
TOLERANCE
(ꢃ)
+ 7ꢀ /C
- ꢁꢁ /C
1ꢀꢀ
7ꢁ
ꢁꢀ
2ꢁ
ꢀ
(Ω)
250 to 150K
100 to < 250
50 to < 100
25 to < 50
0.01
0.02
0.05
0.1
0.2 1.8
0.2 1.8
0.2 2.8
0.2 3.8
0.2 3.8
10 to < 25
0.25
Note
- 7ꢁ - ꢁꢀ - 2ꢁ
ꢀ
+ 2ꢁ + ꢁꢀ + 7ꢁ + 1ꢀꢀ + 12ꢁ + 1ꢁꢀ + 17ꢁ
1. For tighter performances, please contact Vishay Application
Engineering using the e-mail addresses in the footer below.
Aꢂbient Teꢂperature (/C)
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63060
Revision: 18-Sep-08
For any questions, contact: foil@vishay.com
www.vishay.com
1