VCXO
Page 1 of 3
VS9L: PLL LVPECL SERIES: ULTRA HF VCXO, LVPECL, +3.3 VDC
DESCRIPTION: A voltage control crystal oscillator, high frequency, highly stable oscillator, adhering to Low Voltage Differential
Signaling (LVPECL) Standards. The output can be Tri-stated to facilitate testing or combined multiple clocks. The device is
contained in a sub-miniature, very low profile, leadless ceramic SMD package with 6 gold contact pads. This miniature oscillator is
ideal for today's automated assembly environments.
APPLICATIONS AND FEATURES:
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
Infiniband; Fiber Channel; SATA; 10GbE; Network Processors; SOHO Routing; Switches;
Common Frequencies: 150 MHz; 156.25 MHz; 155.52 MHz; 161.1328 MHz; 212.5MHz; 312.5MHz
+3.3 VDC LVPECL
Frequency Range from 38MHz to 640MHz
Advanced Low Noise PLL multiplication (F>25MHz)
Miniature Ceramic SMD Package Available on Tape and Reel
Lead Free and ROHS Compliant
ꢂ
ABSOLUTE MAXIMUM RATINGS:
PARAMETER
SYMBOL
VALUE
UNIT
Operating temperature range Ta
-40…+85
-55…+90
°C
Storage temperature range
Supply voltage
T(stg)
°C
Vcc
Vi
+4.6
VDC
VDC
VDC
Maximum Input Voltage
Maximum Output Voltage
Vss-0.5…Vcc+0.5
Vss-0.5…Vcc+0.5
Vo
ꢂ
ELECTRICAL PARAMETERS:
PARAMETER
SYMBOL
TEST CONDITIONS*1
VALUE
UNIT
Nominal Frequency
Supply Voltage
Supply Current
Output Logic Type
Load
fo
38 to 640
+3.3 ±5%
100.0 MAX
LVPECL
MHz
VDC
mA
Vcc
Is
Connected between each output and Vcc – 2.0 VDC
50
Ω
Voh
Vol
min
max
Vcc-1.025
Vcc-1.620
VDC
VDC
Output Voltage Levels
Duty Cycle
DC
Measured at 50% of output voltage swing
40/60 to 60/40 or 45/55 to 55/45
0.3 to 0.5 TYP, 0.5 to 0.7 MAX**
%
Rise / Fall Time
tr / tf
Measured at 20/80% and 80/20% output voltage swing
ns
Integrated Phase tji RMS,
Fj = 12 kHz…20 MHz5
Fo=155.52MHz
Fo=622.08MHz
Fo=155.52MHz.
Fo=622.08MHz
Fo=155.52MHz.
Fo=622.08MHz
∆f=10 Hz
∆f=100 Hz
∆f=1 KHz
∆f=10 KHz
∆f=100 KHz
∆f=1M Hz
0.4 TYP
ps
ps
ps
0.4 TYP**
3.5 TYP **
6 TYP **
20 TYP**
40 TYP**
Random period Jitter Rj using
wavecrest analyzer 4
Jitter
J
Acumm. Peak to Peak Jitter Tp-p
using wavecrest analyzer*4
-60
-90
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
-120
-130
-128
-144
-150
-150
Phase Noise
typ. @155.52MHz6
£(∆f)
∆f=10M Hz
∆f>20M Hz
Overall Frequency Stability typ.
Op. Temp., Aging, Load, and Supply Variations
ppm
∆f/fc
VC
<±50*(Note 7)
0 to +3.3
Control Voltage Range
Settability
Positive slope; 10% linearity MAX
VDC
VDC
Vfo
+1.65 ± 0.25
Minimum guaranteed freq. pull over ∆f/fc, over all
conditions
Absolute Pull Range
APR
See Part Numbering
ppm
Input Impedance
Modulation Bandwidth
Zin
BW
10 MIN
10 MIN
kΩ
kHz
-3 dB
Enable High Option;
VDC
VDC
En
Dis
High Voltage or No Connect
Ground
0.7•Vcc MIN
0.3•Vcc MAX
Pin 2
Output Enabled
Output Disabled
Enable Low Option;
Pin 2 Output Disabled
Output Enabled
VDC
VDC
Dis
En
High Voltage
Ground or No Connect
0.7•Vcc MIN
0.3•Vcc MAX
RALTRON ELECTRONICS CORP. ꢀ10651 N.W . 19t h St ꢀMiami, Florida 33172 ꢀU.S.A.
phone: (305) 593-6033 ꢀfax: (305) 594-3973 ꢀe-mail: sales@raltron.com ꢀWEB: http://www.raltron.com